Jewelry workshops in Kazakhstan
Jewelry RepairKazakhstan: prices for workshop services
Has your favorite ring become too small, the lock on the gold chain is broken, and a stone has fallen out of the family earrings? Collected on NATUMBE.KZ0 listingsfrom trusted jewelers. Laser soldering, fixing of stones, rhodium plating — we return the original luster to the jewels.
Jewelry is not just metal
These are our memories, gifts from loved ones, symbols of important life events. When such a thing breaks down, you want to entrust it only to reliable hands.
Has your favorite ring become too small, the lock on the gold chain is broken, and a stone has fallen out of the family earrings? It's a familiar and very frustrating situation. Jewelry is not just a precious metal. These are our memories, gifts from loved ones, symbols of important life events. And when such a thing breaks down, we want to entrust its restoration only to reliable hands.
If you are currently looking for a place to fix your jewelry efficiently and without overpayments, you have come to the right place. On our platform, according to your request, alreadyfound 0 listingsads from trusted private jewelers and major service centers.
In this article, we will analyze in as much detail as possible how the cost of services is formed, what to pay attention to when choosing a master, how not to become a victim of fraud and whyjewelry repair via NATUMBE.KZ— This is the most transparent and convenient way to bring your jewelry back to life.
What types of jewelry repairs exist?
Modern jewelry workshops offer a wide range of services. Thanks to laser soldering, today it is possible to restore even what was not done 10 years ago.
Increasing/decreasing rings
The most frequent service. Fingers change in volume due to weather, age, diets, or pregnancy. The wizard changes the size in two ways: stretching (for smooth ones) or inserting/cutting metal (for rings with stones).
Soldering of chains and bracelets
The chains are constantly breaking: they got caught on a sweater, a child pulled, and they were taken off along with a T-shirt. Conventional gas soldering is used for massive circuits. Laser jewelry microsurgery for thin and hollow products.
Fixing and selecting stones
If a diamond, emerald, or cubic zirconia falls out of the pendant, don't panic. Jewelers will select the stone of the right size and cut. The master does not "glue" — he forms a seat and bends the edges so that the stone sits firmly.
Cleaning, polishing, rhodium plating
Ultrasonic cleaning knocks dirt out of hard-to-reach places. Polishing brings back the mirror shine. Rhodium plating covers white gold with the thinnest layer of rhodium — that dazzling ice-white color.
Repair of earrings
Replacement of locks (English, French, Italian), repair of hinges, replacement of seams, fixing of fallen stones. Congo locks and hinges on heavy earrings are especially common.
Production from the customer's material
Bring old broken chains, unfashionable rings — the jeweler will melt them down and create a new jewelry according to the catalog or an individual sketch. Much cheaper than buying a ready-made one.
Laser welding
Aerobatics of jewelry repair. The laser hits the target precisely, without heating the whole product. It is ideal for repairing near stones, hollow chains, and enameled products that are afraid of fire.
Restoration of antique items
Careful restoration of family jewels, antique brooches, rings. Preserving the patina, making the missing elements manually, working with historical techniques.
Working with enamel
Restoration of hot and cold enamel, color selection, work with cloisonne enamel. Enamel is categorically afraid of fire — it requires a special approach and laser technology.
, The two most popular services in detail
How exactly do craftsmen change the size of rings and solder chains — we understand the technology
Increasing and decreasing the size of the rings
This is probably the most frequent reason to contact specialists in Kazakhstan. Our fingers change in volume due to the weather, age, diets or pregnancy. The wizard can change the size in several ways:
Stretching / Compression (pinocchio)
Suitable forclassic smooth wedding ringswithout stones. The metal is simply mechanically stretched on a special crossbar (cone rod) using a mallet or a press. It's fast (15-30 minutes) and inexpensive.
- The maximum magnification is 0.5-1 size
- Only for smooth rings without stones
- Quickly, it's done in front of you
- Minimum cost
- Not suitable for rings with enamel
Metal insertion / cutting
If the ring hasintricate design or encrusted with stones you can not stretch it — the stones will simply fly out of the seats (krapanov). The jeweler carefully saws the tire (ring rim), adds or removes some of the gold/silver, and then solders and polishes the seam.
- Any size change (up to 3-4 sizes)
- Suitable for rings with stones
- The seam is completely invisible
- Preserves the durability of the product
- It is possible to work with enamel (laser)
Soldering of chains and bracelets
Chains break all the time — this is the most common breakdown. Modern technology allows you to restore even the most delicate and complex weaves.
Conventional gas soldering
The classic method is using a gas burner and special solders. Suitable formassive chains(Bismarck, Anchor, Armor) and thick bracelets. The master heats up the break point, applies solder and carefully connects the links.
- For massive chains and bracelets
- Fast — 10-20 minutes
- Cheap
- Not suitable for hollow products
- Dangerous for rocks nearby
Laser soldering
Jewelry microsurgery. Laser beam is used to restorethe finest chains(snake, snake), hollow (inflated) products and repair areas near precious stones that are afraid of heating. The laser beam hits exactly the target, without heating the whole product.
- For thin and hollow chains
- Repairs near the stones
- Working with enamel (does not fade)
- High accuracy — up to 0.1 mm
- The seam is almost invisible
, What do jewelry repair prices depend on in Kazakhstan?
Why does soldering cost pennies in one workshop, while in another they ask for a significant amount? The price spread is normal. Let's look at 4 key factors
Decoration Material
It is cheaper to work with silver than with gold. Platinum requires a temperature of 1800°C and special solders — repairs are always more expensive.
Complexity of work
Sealing a cast link is a matter of minutes. Repairing a hollow chain or an enamel ring is aerobatics that requires a laser.
Adding metal
When the ring is increased by 2 sizes, the jeweler adds his own gold of the same sample. The cost of the metal is included in the receipt.
Equipment and qualifications
A microscope, a German laser, high-quality pastes and rhodium cost tens of thousands of dollars. Services with such equipment charge more, but the quality is impeccable.
Detailed price list Kazakhstan
| Service | Price | Time | Note |
|---|---|---|---|
| Stretching the smooth ring (pinocchio)top | 3 000 — 6 000 ₸ | 15-30 minutes | Without stones |
| Ring enlargement (metal insert) | 8 000 — 15 000 ₸ | 1-3 days | + metal cost |
| Ring reduction (clipping) | 6 000 — 12 000 ₸ | 1-2 days | The metal is coming back |
| Chain soldering (gas)top | 2 000 — 5 000 ₸ | 15-30 minutes | Massive chains |
| Chain soldering (laser) | 4 000 — 10 000 ₸ | 30-60 minutes | Thin, hollow |
| Soldering the bracelet | 3 000 — 8 000 ₸ | 30-60 minutes | Depends on the thickness |
| Stone fixing (cubic zirconia) | 3 000 — 6 000 ₸ | 30-60 minutes | Easy pinning |
| Fixing a stone (diamond)top | 5 000 — 15 000 ₸ | 1-2 hours | Precision is required |
| Stone fixing (emerald, sapphire) | 6 000 — 15 000 ₸ | 1-3 hours | Fragile stones |
| Stone selection and sealing | 8 000 — 25 000 ₸ | 2-5 days | + the cost of the stone |
| Ultrasonic cleaning | 1 500 — 3 500 ₸ | 15-30 minutes | Not for pearls! |
| Polishing of the product | 3 000 — 8 000 ₸ | 1-2 hours | Mirror shine |
| Rhodium plating (white gold) | 5 000 — 12 000 ₸ | 1-3 days | Icy white color |
| Rhodium plating (silver) | 3 000 — 7 000 ₸ | 1-2 days | Protection against darkening |
| Replacement of the earring lock | 2 500 — 7 000 ₸ | 30-60 minutes | English, French |
| Earring Loop Repair | 2 000 — 5 000 ₸ | 20-40 minutes | Soldering, reinforcement |
| Bracelet Lock Repair | 3 000 — 8 000 ₸ | 1-2 hours | Carbine, box |
| Production from the customer's material | from 15,000 ₸ | 7-30 days | Work without metal |
| Laser welding (difficult cases) | 8 000 — 25 000 ₸ | 1-3 hours | Enamel, stones nearby |
| Restoration of antique items | from 20,000 ₸ | 7-60 days | Individually |
| Working with enamel | 5 000 — 30 000 ₸ | 3-14 days | Hot/Cold |
| Engraving (manual) | 3 000 — 15 000 ₸ | 1-3 days | Depends on the complexity |
| Determination of the sample and authenticity | 1 500 — 5 000 ₸ | 15-30 minutes | Acid test device |
Don't chase the lowest price in the transitions.Repairs that are too cheap often turn into a damaged product — black seams from bad solder, stones that fall out after a week, scratches from inept polishing. Choose oneThe golden mean by studying the profiles of the masters on our portal, reading reviews and checking the portfolio.
How to choose the right jewelry workshop?
Finding a good jeweler is akin to finding a good dentist. It should be the person you trust with your jewelry.
Real photos of the work (Before/After)
A real pro is always proud of his complex repairs. Pay attention tomacro photos of seams and fasteners— that's where the jewelry precision is visible. If the portfolio contains only stock photos or images from the Internet, this is a red flag. A serious master shows real work.
Customer reviews
This is social proof number one. Read what other residents of Kazakhstan write. Pay attention not only to the stars, but also to the details: do they write abouttiming accuracy, accuracy of work, soldering quality. Feedback about how the master communicates in the comments is important — this is an indicator of the attitude towards customers.
Availability of a clear price list
Phrases like"the price is by agreement on the spot"They should be alarming. A professional can always name at leastThe "fork" of prices (from and to)for standard services. A transparent price list is a sign of a serious approach. If the prices are indicated in the ad on NATUMBE.KZ, it saves you time and nerves.
Job guarantee
A self-respecting workshop always gives a guarantee:for soldering — from 1 to 6 months. for fixing stones — 3-6 months, for childbirth — 6-12 months. If the link breaks in the same place after a week or the stone falls out during normal wear, you should have it redone for free. The guarantee must be stated on the receipt.
Professional equipment
GoodThe microscope (Leica, Zeiss), German laser machine(Orion, LaserStar), high-quality consumables (pastes, rhodium) they cost tens of thousands of dollars. Service centers with such equipment charge a little more, but the quality there is impeccable — without black seams and traces of solder. Ask what equipment the master uses.
The master's specialization
Jewelry business has narrow specializations:chain repair, fixing the stones, working with enamel, antique restoration. For complex work, look for a specialized master. An all-rounder who "does everything" is often inferior to a narrow specialist in quality.
🚨 Red flags — when to opt out
There is no portfolio
The master does not show real photos of the work or shows only someone else's photos from the Internet. A serious jeweler is proud of his intricate repairs and demonstrates them.
It works without a receipt
"Pass it from hand to hand on your word of honor" is a direct path to problems. Any serious workshop draws up a document with a sample, weight and description.
The price is "by eye"
He cannot name a specific amount or constantly changes it. The professional immediately announces the price or price fork with an explanation of what the final amount depends on.
Negative reviews about substitutions
If they say "the stone has been replaced", "the weight has become less", "the seams are black" — run. These are basic violations of professional ethics. Reputation is not restored in such cases.
It works "on the knee"
If jewelry is repaired on the kitchen table without a magnifying glass, special tools and a clean work area, this is not a jeweler. The work requires sterility and precision.
The price is too low
The price is 2-3 times lower than the market —A reason to be wary. Reasons:cheap solders(give black seams and weak connection),lack of equipment(the laser costs from 500,000 ₸),lack of experience, Using other people's stones. Saving 3,000 ₸ will result in a damaged piece of jewelry worth 300,000+ ₸ and wasted time on rework.The Golden Rule:if it's too cheap, something's wrong.
How can I repair jewelry and not become a victim of deception?
The most important fear of customers is "what if the diamond is replaced?" or "what if some of the gold is stolen?" These are natural concerns. Here is the checklist
The weighing is with you
The master is obliged to put the product on the table with you.high-precision calibrated scalesand fix the weight to the nearest hundredths of a gram. This is the main indicator of honesty.
Examination of stones with a magnifying glass/microscope
Ask to see your stones in magnification. Every natural diamond, sapphire, and emerald hasunique inclusions(dots, microcracks). Remember them — this is your "passport" of the stone.
Making a receipt
No "hand-to-hand transfers" on my word of honor. The master must write out a receipt with a stamp (or an electronic receipt), where the following are indicated:metal sample, exact weight before repair, product description, declared type of repair.
Acceptable losses (carbon monoxide)
During soldering, cleaning and grinding, a microscopic layer of metal is removed.Weight loss 0.01-0.05 gramsafter a complex repair, this is a normal physical process, not theft. The exact percentage of carbon monoxide is negotiated in advance.
Product photofixation
Take a picture of the decorationfrom all sides at the handover. Close-ups of rocks, castles, and soldering points are especially important. This is your insurance policy for disputes. Serious workshops take photos themselves during acceptance.
Description of defects
The receipt must specifyall existing defects: chips on the stones, scuffs, scratches, traces of previous repairs. This will protect you from being accused of "new" damages.
The more expensive the decoration is —Follow the checklist all the more strictly.. For heirloom diamonds and antique items, the following are required: weighing, photofixation, examination under a microscope with the fixation of unique inclusions of stones, a detailed receipt with a description,insurance on delivery(if you send it by mail). This is not paranoia — it is a reasonable precaution when dealing with values.
, Frequent user questions
Answers to the most popular questions from residents of Kazakhstan who are looking for a jeweler
Yes, you can.Previously, the craftsmen refused them, as the thin walls of the foil gold instantly burned under the flame of the burner. Now, if the workshop haspulsed laser welding machine The repair will take 10-15 minutes. The laser works pointwise without heating the entire product. However, remember: inflated chainsthey lose strength at the point of rupture— you need to wear them very carefully, avoid jerks and hooks on clothes.
In 80% of cases, repairs are carried out right in front of you.and it takes from 15 to 40 minutes. These services include: soldering links, ultrasonic cleaning, stretching of simple wedding rings, replacement of the earring lock.Difficult jobs(laser restoration of the flecks around the emerald followed by rhodium plating, restoration of antique items, custom-made) can take from 1 to 30 days, depending on the complexity.
No! This is the most common panic among customers.The natural color of white gold (depending on the ligature — nickel or palladium) hasslight grayish-yellowish tint. It becomes snow-white only due to the coating with rhodium. When strongly heated during soldering, the rhodium burns out, exposing the true color of the metal. The master should justre-coat the repair site (or the entire product) with a layer of rhodium and it will turn snow-white again. This is standard procedure, not cheating.
It is absolutely safe for gold and platinum without stones.It's great for cubic zirconia and diamonds (they start to sparkle incredibly when the accumulated fat from creams is knocked out from under them).but!Ultrasoundcategorically contraindicatedfor: pearls, amber, corals, turquoise, emeralds (if they have microcracks filled with oil) and opals. The stone may simply split from the vibration. An experienced jeweler with NATUMBE.KZHe would never put such stones in a tub.— he will brush them by hand with a soft brush.
Of course!It is calledproduction from the customer's material. You can bring old, unfashionable, torn gold items of any quality. The jeweler will weigh them, recalculate them for purity of 585 or 750 samples (refining or recalculation), and create a completely new jewelry for you according to the catalog or individual sketch.It comes out much cheaper. than buying ready-made jewelry in a jewelry store, since you only pay for the work of the master (starting from 15,000 rubles), and not for the metal itself.
Childbirth— this is the coating of white gold or silver products with the thinnest layerRodia(platinum group metal). Rhodium gives the samedazzling icy white colorand protects the jewelry from scratches. The coating is erased in 1-3 years, depending on the intensity of wear (rings — faster, earrings — slower). Therefore, rhodium plating is a regular procedure for owners of white gold. The cost is 5,000-12,000 ₸ for rings.
Follow the checklist: 1)Weighing with you on a calibrated scale with an accuracy of hundredths of a gram.2)Examination of stones with a magnifying glass / microscope — remember the unique inclusions (your "passport" of the stone).3)Registration of a receipt with a sample, weight, description and declared repair.4)Photofixation of the product from all sides.5)Description of all existing defects in the receipt.6)The permissible loss (carbon monoxide) of 0.01-0.05 grams after a complex repair isa normal physical process not stealing.
4 main factors: 1)Material (silver is cheaper than gold, platinum is more expensive due to the melting point of 1800°C).2)The complexity of the work (laser soldering of hollow circuits is more expensive than conventional gas).3)The need to add metal (when increasing the ring by 2 sizes).4)The master's qualifications and equipment (a laser device costs from 500,000 rubles, a Leica microscope — from 300,000 rubles).High-quality consumables(rhodium, pastes, solders) are also expensive.
Yes, but only by inserting metal.Stretching (using the pinocchio method) a ring with stonescannot— the stones will fly out of the landing spots (krapanov). The jeweler carefully saws the tire (the rim of the ring), adds a piece of gold of the same sample, solders and polishes the seam. The place of work will becompletely unnoticeable. Cost: 8 000-15 000 ₸ + the price of the added metal. For rings with a large number of stones in a circle, only laser welding is used, so as not to damage the fasteners by heating.
Yes, self-respecting workshops provide a guarantee:for soldering — from 1 to 6 months, for fixing stones — 3-6 months, for rhodium — 6-12 months, for changing the size of rings — 3-6 months. If the link breaks in the same place after a week or the stone falls out with normal wear,You have to redo it for free. The guarantee must be specified in the receipt or receipt. The lack of a guarantee is a red flag.
Yes, but this is a narrow specialization.Enamel is categorically afraid of fire — when heated, it cracks and burns out. For such products, it is usedlaser welding only, which works pointwise and does not heat the entire product. The restoration of the enamel itself is a separate difficult task: hot enamel requires kiln firing, cold — special resins. The cost is 5,000—30,000 ₸, depending on the complexity. Look for craftsmen who specialize in enamel.
Yes, many jewelers Kazakhstan work with delivery in Kazakhstan.You send jewelry by Kazpost or courier service withmandatory full-cost insurance(for expensive items), the master repairs it and sends it back. The cost of delivery is 2,000—5,000 rubles in both directions. This is especially true forcomplex restorations, antique items, work with enamel— top craftsmen with unique skills are concentrated in Almaty and Astana.
How to take care of jewelry after repairs?
You have taken your shining ring or chain from the workshop. To avoid coming back too often, follow the basic rules.
Take off your rings at the gym and at home
A metal barbell handle, dumbbells, or even the handle of a heavy frying pandeform the gold tire of the ring in seconds. The stones loosen and fall out. It is especially dangerous for rings with a krapan fastener.
Be careful with cosmetics and perfumes
Pearls, turquoise and silver hate chemistry.First, apply hairspray and perfume, wait 5 minutes. and only then do you put on jewelry. It is especially important for pearls — they absorb odors and chemicals.
Proper storage of silver
Silver darkens due to the reaction with hydrogen sulfide, which is in the air.Keep clean silver jewelry in tightly sealed zip-lock bags.in a dark box. They won't darken for years! You can add anti-tarnish strips.
Home cleaning
Forget about the barbaric methods from the Internet like brushing with tooth powder, soda or Coca-Cola — they leave micro scratches.The best homemade recipe:warm water + a couple of drops of mild dishwashing detergent + a soft baby toothbrush. Soaked for 20 minutes, carefully cleaned, rinsed, wiped with flannel.
Take it off before water
Chlorinated pool water and salty sea waterdestroy gold alloys and damage stones. Especially dangerous for pearls, turquoise, opals. Take off jewelry before swimming, taking a bath, or washing dishes.
Keep it separate
Jewelry must be keptseparate from each other— in individual pouches or casket compartments. Diamonds scratch gold and other stones (hardness 10 on the Mohs scale). Scratches spoil the polish and appearance.
- Do not clean pearls, turquoise, corals in ultrasound— they will split
- Do not use abrasives(tooth powder, baking soda, pastes) — leave scratches
- Do not wear jewelry in the pool.— bleach destroys gold
- Don't sleep in jewelry— deformation, breakage of locks
- Do not apply makeup over jewelry.— especially for pearls
- Don't keep all the jewelry together.— diamonds scratch everything
Why is it profitable to search for a jeweler through NATUMBE.KZ?
This is a strategically correct decision. Users choose our site for 5 key reasons
Huge selection
Already in the database0 listingsads. You are not limited to one workshop around the corner — choose from dozens of trusted specialists.
Healthy competition
The masters see each other's suggestions and try tokeep adequate prices, improve the service and quality of service to get a customer.
Direct communication
You can write to the chat wizard, send a photo of the breakdown and find out the preliminary cost.Even before leaving the house. Save time and nerves.
Convenient geo-search
Filter the ads and find the workshop that is located in the next house orOn the way from your jobin Kazakhstan. Save time on the road.
Honest ratings
It is impossible to build a reputation on the platform without real deals.The rating stars reflect the real experienceother people. Choose the masters with 20+ reviews.
Specialization for your task
Needlaser soldering of hollow circuit? Filter by equipment.Antique restoration? Filter by specialization.Securing the diamond? The masters are with this expertise. You finda dedicated specialist for a specific task and not a generalist who does everything. This is a guarantee of quality and professional approach.
, What customers say Kazakhstan
Real stories of people who restored their jewels to their original luster through NATUMBE.KZ
"The wedding ring became small after giving birth. The jeweler on NATUMBE.KZ enlarged it using the insertion method — the seam is absolutely invisible, even under a magnifying glass it cannot be found! 9,500 ₸ + metal. The master showed everything under a microscope, weighed it in front of me. Now I wear it with pleasure."
"A thin gold chain broke-snake thought it was the end. They refused in a regular workshop. I found a laser welding wizard through NATUMBE.KZ. They were soldered in 20 minutes — the seam is not visible at all! 6 000 ₸. Laser is magic."
"A 0.3 carat diamond fell out of the earring — panic! The master picked up a similar stone, fixed it, and made a rhodium. 18,000 ₸ for everything. The earring is as good as new, even better now. I showed the inclusions of my stone under a microscope — now I know its "passport"."
"Grandma's enamel brooch from the 1950s-I thought they wouldn't restore it. The restorer from Almaty took over through NATUMBE.KZ. 2 months of work, 45,000 ₸. The enamel was restored, the stones were fixed, and the patina was preserved. The family heirloom has come to life! Thank you!"
"The white gold of the ring turned yellow after soldering in another workshop — I was scared. It turned out that the rhodium had simply burned out. A new master made a rhodium ring for 7,000 rubles — the ring is snow-white again, even better than the new one! I know now: that's fine."
"I brought 3 broken chains and an old ring, and I asked them to make a new piece of jewelry. The jeweler melted it down and created a modern pendant based on my sketch. 22,000 ₸ for work. It turned out to be 5 times cheaper than buying ready-made! And unique."
Restore the jewels to their original luster
0 listings verified jewelers Kazakhstan. Laser soldering, stone fixing, rhodium plating, restoration. The warranty is up to 12 months. Your jewelry deserves a second life!