Audio processor Tendzone Smart S1212/S

The Tendzone Smart S1212/S digital audio platform is a versatile audio processing device equipped with powerful state-of-the-art DSPs that allow individual processing of each input and output channel, as well as audio signal routing. Designed to control sound reinforcement systems, background music broadcasting, etc. Characteristics: - sensitivity control, - expander / gate, - 5-band parametric equalizer, - compressor, - automatic gain control. Processing modules for each output: - 8-band parametric EQ - 2-band crossover (Butterworth/Bessel/Linkwitz-Riley) - delay line - limiter - output attenuator. -Routing signals from any input to any output. - RS-232 port for controlling third party systems. - RS-485 port to control PTZ cameras using Pelco/VISCA protocols. -Ethernet port (referred to as M-LAN) for instrument configuration, RC-Link port for connecting control panels and GPIO port. - LED status indicators for each channel. - The audio platform is equipped with a priority module (ducker) and automatic volume control (SPL). Specifications: - DAC/ADC 24 bit, 48 kHz, - 64 bit internal processing, - configuration and setup via Smart 2.0.293 software under Windows, - instrument control via software, third party hardware, control panels and GPIO channels, - separate Ethernet port with PoE function for direct connection of control panels, - function of automatic control of PTZ cameras, - function of control of additional equipment (video switches, etc.), - saving and loading of all device settings, up to 50 user cells, - phantom power 48 V on each input channel (switchable), - input gain up to 54 dB, - generation of test signals (sine wave, white noise, pink noise), - DAC / ADC dynamic range - 114 dB, - frequency range 20-20000 Hz (± 0.5 dB), - coefficient of non-linear distortion no more than 0.005% (1 kHz), - input impedance 2 kOhm, - output impedance 100 Ohm, - maximum output level with 20 dB signal (relative to 0.775 V), - analog inputs and outputs - Phoenix connectors, - RS-232 and RS-485 ports - Dsub9 connectors, - GPIO port - Dsub25 connector, - number of GPIO channels - 8 input, 8 output ( 4 of them are open-collector), - operating temperature range 0-40°C, - supply voltage 100-240V, 50-60 Hz, - power consumption - 60 W.