Die-cutting press
1 978 584 ₸
Die-cutting press
№89092
Created: March 7 2022
Created: March 7 2022
Address:
Moscow, Moscow Oblast, Russia
Line composition:
1 notch press
2 Loading table
3 Sheet feed mechanism
4 Lateral sheet shift mechanism
5 Two sets of knives (2 sets of upper circular knives mounted in the center of the knife, which can be rotated around the center of the knife during operation, as well as tilted, when the entire cutting edge of one side is worn to the other side. 2 sets of upper knife supports. 2 sets of flat lower knives with four cutting edges on each knife.)
Main technical parameters:
1 Thickness of punching and cutting material: ≤6mm
2 Tensile strength of the workpiece: up to 550 MPa;
3 Maximum punching and cutting width: 2000mm;
4 Feeding method: By servo motor;
5 Feed distance: 0-30mm;
6 Knife offset: Automatic;
7 Knife offset: 30 - 80 mm;
8 Cutting method: Automatic cutting;
1 notch press
2 Loading table
3 Sheet feed mechanism
4 Lateral sheet shift mechanism
5 Two sets of knives (2 sets of upper circular knives mounted in the center of the knife, which can be rotated around the center of the knife during operation, as well as tilted, when the entire cutting edge of one side is worn to the other side. 2 sets of upper knife supports. 2 sets of flat lower knives with four cutting edges on each knife.)
Main technical parameters:
1 Thickness of punching and cutting material: ≤6mm
2 Tensile strength of the workpiece: up to 550 MPa;
3 Maximum punching and cutting width: 2000mm;
4 Feeding method: By servo motor;
5 Feed distance: 0-30mm;
6 Knife offset: Automatic;
7 Knife offset: 30 - 80 mm;
8 Cutting method: Automatic cutting;
№89092
Created: March 7 2022
Created: March 7 2022
1 978 584 ₸
Negotiable
