Checking and flushing petrol injectors at a professional stand

Professional cleaning of MPI low pressure nozzles. Flushing nozzles without removal is a preventive measure, not a cleaning and is not always effective. 7 parameters for checking injectors on the stand: - balance check - performance check - tightness check - spray jet check - winding resistance check - static test - dynamic test You can determine a malfunction in the injector by several factors: errors, - a significant increase in fuel consumption, - the engine does not start well, especially if it is cold, but it also happens vice versa, starting from a cold, good to a hot, bad start, - sometimes there is a lot of black smoke from the exhaust system (if the nozzle has flowed into the combustion chamber, it can get too a lot of fuel, after which the valves, pistons, catalyst burn out), - sometimes there are loud pops from the muffler, - the car loses its dynamism, power drops, jerks appear even when driving on a flat road, as well as when the engine load changes. Low pressure nozzles are washed with ultrasonic cleaning and do not receive harm from this procedure. If you need a QUALITY injector cleaning - call us! The consultation is free. We also carry out computer diagnostics of the car. Call 87479798484 right now Flushing the injectors with and without removal Checking the injectors at the stand Cleaning the injectors Injector diagnostics injector injector diagnostics injector repair injector testing