Locksmith and safecracker services in Kazakhstan

No listings found Check search query and try again.

🗝️PROFESSIONAL WORKSHOP · {region.in }

Making keysin Kazakhstan: fast, accurate, guaranteed

Collected on NATUMBE.KZ0 listingsfrom professional craftsmen. Duplicates of apartment, car, intercom, and safe keys. Chip keys, Smart Key, Lock repair, recoding. CNC machines, high-quality alloys.

0 listings The Masters
5 minutes Min. time
from 500 ₸ Price start
100% Guarantee

The key is a small thing with a lot of responsibility.

Each of us has faced an unpleasant situation at least once in our lives: the key to the apartment was lost, the car key in the ignition lock was broken, or we just needed an additional kit for a new family member. At such moments, the issue of safety and prompt solution of the problem comes to the fore.

On our platform at the momentfound 0 listingsoffers from qualified specialists. Studyingads NATUMBE.KZ, you will be able to quickly find the right master, find out the honestprices for making keys in workshopsand order related productsrepair services.

In this detailed guide, we will analyze all the nuances: from the selection of the workpiece to the restoration of complex chiped car keys. You will learn why you shouldn't skimp on duplicates, how to choose a professional craftsman, and what modern technologies are used in this field.

A good key is not just a piece of metal. This is the result of precise engineering, high-quality materials and the master's expertise. One bad duplicate can ruin an expensive lock in a couple of months. Trust only professionals.— Timur Kasymov, a master housekeeper with 22 years of experience, {region.in }
Why is it important

Why is it so important to trust the production of professionals?

Many, in an effort to save money, turn to unnamed kiosks in the passages. However, making keys is a process that requires jewelry precision.

Even a deviation of tenths of a millimeter can lead to the fact that a new duplicate will start to "jam", spoil the secrecy mechanism (larva) and eventually lead to jamming of the door. Replacing a larva will cost 10-20 times more than a high-quality duplicate.

Professional craftsmen, whose services are presented on our site, usehigh-precision CNC machines(numerically controlled) and high-quality alloys. By doingduplicate keys {region.in }with trusted specialists, you get:

🎯

Perfect accuracy

The key will enter the well gently, without unnecessary effort and backlash. Professional machines give an error of less than 0.02 mm.

⏳

Durability

The use of high-quality brass, steel or nickel silver prevents rapid tooth wear. The key will last for years, not months.

✅

Guarantee

In case of problems, the wizard will finalize the profile for free or refund the money. There are no guarantees in unnamed kiosks.

🔒

Confidentiality

Self-respecting services do not store casts and customer data. In the doorways, the impression can be sold to third parties.

The danger of cheap duplicates:

The "basement" workshops useworn-out machineswith a backlash of up to 0.3 mm andsoft blanksunknown origin. Such a key: 1) it quickly grinds and breaks in the lock (you will have to call the Ministry of Emergency Situations), 2) spoils the pins of the larva —cylinder replacement 8,000-25,000 ₸ 3) it can jam at the wrong moment. Saving 500-1000 ₸ on a duplicate turns into spending 10-50 times more.

Types of keys

What types of keys can be made and how much does it cost?

The range of modern locks is huge, and each requires its own approach. Let's analyze the main categories

🏠

Apartment buildings and brownies

RESIDENTIAL KEYS

The most sought-after category. These include English (flat with teeth), profile (with perforations or "holes"), lever ("butterflies") and cross keys. Modern perforated ones (Cisa, Mottura, Mul-T-Lock) require a vertical milling machine.

  • English Flat (Cisa, Kale)
  • Profile with perforation
  • Finnish (Abloy) — semicircular
  • Suvaldny "butterfly"
  • Krestovy (for old castles)
  • Perforated with holes
Cost 500 — 6 000 ₸
🚗

Car keys

AUTO KEYS

A modern car key is not just a piece of metal, buta complex electronic devicewith an immobilizer chip, central locking buttons and a keyless entry system. Loss is a real stress, but professionals recover even if all copies are lost.

  • Mechanical (without chip)
  • Chip key (immobilizer)
  • Flip-out with buttons
  • Smart Key (keyless access)
  • Keyless Go (premium car)
  • VIN recovery
Cost 3 000 — 150 000 ₸
🏢

Intercom keys (ACS)

INTERCOM / ACCESS

Magnetic tablets (Touch Memory), RFID key rings, access cards - without them it is impossible to imagine a modern apartment building or office. Making such a duplicate takesjust one minute. The wizard reads the code from the original and copies it onto an empty blank.

  • Tablets Dallas, Cyfral, Metakom
  • RFID keyfobs (125 kHz, 13.56 MHz)
  • Mifare, EM-Marine access cards
  • Key rings for barriers
  • Copy-protected keys
Cost 500 — 2 500 ₸
🗄️

Safe deposit boxes and furniture

SAFE / FURNITURE

The keys for safes (Mauer, Stuv, Fichet) are differentincreased complexityand they are made of particularly durable alloys. To copy them, you need a highly qualified specialist — the slightest inaccuracy will lead to the blocking of expensive storage.

  • Two-bearded safes
  • Tubular
  • Keys of Mauer, Fichet, Stuv
  • Furniture (cabinets, cabinets)
  • Postal (PO Box)
  • Garage Door Lock Keys
Cost 1 500 — 15 000 ₸

Detailed price list {region.in }

Key type Usual Premium Time
English Flat (Cisa, Kale) 500 — 1 000 ₸ 1 000 — 1 500 ₸ 5-10 minutes
Profile with perforationtop 1 500 — 2 000 ₸ 2 000 — 3 000 ₸ 10-15 minutes
Perforated with holes (Mul-T-Lock) 2 500 — 4 000 ₸ 4 000 — 6 000 ₸ 15-25 minutes
Finnish (Abloy) Semicircular 1 500 — 2 500 ₸ 2 500 — 4 000 ₸ 10-20 minutes
Butterfly lock (safety deposit box) 2 500 — 4 000 ₸ 4 000 — 6 000 ₸ 20-40 minutes
Krestovy (old castles) 1 000 — 1 500 ₸ 1 500 — 2 500 ₸ 10-15 minutes
Intercom tablet (Dallas, Cyfral) 500 — 800 ₸ 800 — 1 500 ₸ 2-5 minutes
RFID Keychain (125 kHz) 800 — 1 200 ₸ 1 200 — 2 000 ₸ 3-5 minutes
Mifare Access Card 1 500 — 2 500 ₸ 2 500 — 4 000 ₸ 5-10 minutes
Automatic switch is mechanical (without a chip)top 3 000 — 5 000 ₸ 5 000 — 8 000 ₸ 15-30 minutes
Chip key with immobilizer 15 000 — 30 000 ₸ 30 000 — 60 000 ₸ 30-90 minutes
Flip-out key with central locking buttons 18 000 — 35 000 ₸ 35 000 — 70 000 ₸ 40-90 minutes
Smart Key (keyless access) 40 000 — 80 000 ₸ 80 000 — 150 000 ₸ 1-3 hours
Restoring the auto key by VIN 25 000 — 50 000 ₸ 50 000 — 120 000 ₸ 1-3 days
Safe deposit box key (Mauer, Stuv) 3 000 — 6 000 ₸ 6 000 — 12 000 ₸ 30-60 minutes
Furniture key (cabinet, cabinet) 1 500 — 2 500 ₸ 2 500 — 5 000 ₸ 15-30 minutes
Tubular wrench 2 000 — 4 000 ₸ 4 000 — 8 000 ₸ 20-40 minutes
The key is based on a broken sample 3 000 — 8 000 ₸ 8 000 — 15 000 ₸ 30-60 minutes
, What prices depend on: 1)The type of key and lock — the more complex the secrecy mechanism, the more expensive the blank is and the more difficult the job is.2)The presence of a chip (for cars) — programming electronics is much more expensive than simple mechanical cutting.3)Original condition — if the key is broken or badly worn, the master will have to decode it and restore the factory settings, which increases the price.4)Urgency — night and holiday calls are 50-100% more expensive.
Auto Keys

🚗 Car keys: from mechanics to Smart Key

Losing a car key is a real stress. A modern car key is a complex electronic device with many functions

The craftsmen on our platform offer a full range of services for working with car keys. From simple blade cutting to programming complex keyless entry systems in premium cars.

🔪

Cutting the blade

The mechanical part of the key is cutby sample or by code (VIN). Professional machines (Silca, Keyline) provide accuracy up to 0.01 mm. If there is no original, the wizard disassembles the lock, reads the pins and cuts the key from scratch. Modern laser-cut cars (BMW, Audi, Mercedes) require a special laser cutting machine.

💻

Programming the chip

The immobilizer chip ismicrocontroller, which communicates with the car's ECU. The machine will not start without the correct firmware. The wizard uses programmers (Autel, Xhorse, VVDI) to write a unique code into the chip and link it to the car. Each brand has its own protocol (Toyota H-chip, VW MQB, BMW CAS4).

📡

Binding the buttons of the Central control panel

The open/close, trunk, and panic buttons work viaradio channel 315/433 MHz. The wizard synchronizes the keychain with the comfort unit of the car. In modern cars, this is done through the OBD2 connector using a diagnostic scanner. Sometimes access to the BCM block is required to record new codes.

🔓

Smart Key / Keyless Go

The most complex systems. The key works at a distance of up to 2 meters, the caropens by touching the handle, starts with the Start/Stop button. Inside there are several antennas, presence sensors, and AES-128 encryption. Programming requires expensive equipment (cost 2-5 million ₸). The key price is 40,000 - 150,000 ₸.

🚨

What should I do if the last car key is lost?

Don't panic — it'sthe problem being solved. The master drives out to the car, opens the door without damage (with special tools through a seal or a maggot), makes an impression or reads the lock code, makes a blade and programs a new chip.budget cars(Lada, Kia Rio, Hyundai Solaris) cost 25,000-60,000 ₸. Formiddle class(Toyota, VW, Mazda) — 40,000 - 90,000 ₸. Forpremium(BMW, Mercedes, Lexus) — 80 000-200 000 ₸. In some cases (new BMW, Mercedes with FBS4), an order from a dealer is needed — the price is 150,000 -400,000 rubles and the wait is 2-4 weeks.

Popular car brands and work features

Stamp Chip Type Complexity The price of restoration
Toyota / Lexus H-chip, 4D/4C/G/H Average 25 000 — 80 000 ₸
Hyundai / Kia top ID46, DST, Smart Key Average 20 000 — 70 000 ₸
Volkswagen / Skoda / Audi Megamos, MQB, ID48 High 35 000 — 120 000 ₸
Nissan / Infiniti 4D/4E, Intelli Key Average/High 25 000 — 90 000 ₸
BMW (until 2015) CAS3, CAS3+, EWS High 50 000 — 150 000 ₸
BMW (2015+, FBS4) FBS4, BDC Very high 120 000 — 350 000 ₸
Mercedes (until 2015) NEC, BGA, Keyless Go High 60 000 — 180 000 ₸
Mercedes (FBS4, 2015+) FBS4 Dealer only 200 000 — 450 000 ₸
Mazda 4D/4E, Proximity Average 25 000 — 80 000 ₸
Ford 4D/4E, 80bit, 128bit Average 25 000 — 90 000 ₸
LADA Tiris, Megamos Low 8 000 — 25 000 ₸
, The Golden rule:

Always haveminimum of 2 working keysfrom the car. If there is only one left, make a duplicate immediately. Recovery in case of complete loss costs in5-10 times more expensive than making a duplicate. Keep the spare key in a safe place (not in the car!) — at home in a safe or with a trusted relative.

Repair

Repair services: giving things a second life

It is not always necessary to create a new key. It is often much more profitable to order repairs

Studyingads NATUMBE.KZ pay attention to the masters who offer an integrated approach. Many problems are solved by repairing for 10-30% of the cost of a new product.

Repair and restoration of car keys

Car keyfobs often have rubber buttons rubbed off, the flip-out mechanism breaks (the tip does not lock), or the plastic case cracks. The master can:

📱

Case replacement

The internal board from the old key fob is simply rearranged into a new case. All functions are preserved, no reprogramming is necessary.

Cost 5 000 — 15 000 ₸
🔌

Soldering micro buttons

If the buttons stick or fail, the wizard solders the old ones and installs new ones. It works on a professional soldering station with a hair dryer.

Cost 3 000 — 8 000 ₸
🔋

Battery replacement

The battery (usually CR2032) is changed in 5 minutes. It is often because of her that the key stops working from a distance. No need to buy a new one!

Cost 1 500 — 3 000 ₸
⚙️

Repair of the flip mechanism

Replacement of springs, pins, and clamps. The tip will again be clearly fixed in the working and folded position.

Cost 4 000 — 12 000 ₸
💾

Replacement of the immobilizer chip

If the chip is damaged (crack, water, static), the wizard installs a new one and programs it for your car.

Cost 10 000 — 30 000 ₸
🔧

Blade Recovery

A broken stinger can be repaired by welding, replacing, or making a new one. This is especially true for rare old cars.

Cost 5 000 — 20 000 ₸

Recoding locks and replacing maggots

🔄

Recoding the lock lever

If you have lost your keys and are afraid for the safety of your property,it is not necessary to change the entire lockin the door (especially the expensive Italian one). The craftsmen offer a recoding service: the levers are rearranged inside the lock, and the old keys stop working. You get a new set, but the lock remains the same. The cost of 15,000 - 35,000 ₸ is 3-5 times cheaper than replacement.

🔐

Cylinder replacement (larva)

The easiest and fastest way for cylinder locks is —larva replacement. The whole process takes 15-30 minutes: one locking screw is unscrewed, the old larva is removed, and a new one is inserted. The price is 8,000-25,000 ₸, depending on the brand (Apecs, Kale, Cisa, Mottura, Mul-T-Lock). You get a new set of keys.

⚠️

When is it necessary to change or recode the lock

Mandatory cases:1) loss of all keys, 2) theft of keys, 3) after a divorce / separation (the former partner has access), 4) after the dismissal of the housekeeper / babysitter with keys, 5) after buying an apartment (the former owners may have left copies), 6) after a burglary attempt, 7) if the key is broken inside the castle.IgnoringThere is a direct risk of burglary in these situations, with or without burglary. The cost of transcoding/replacement pays off many times.

✅ Saving on repairs:in 80% of casesauto key repairit costs 3-10 times cheaper than buying a new one. A typical situation: the Toyota Camry keychain stopped working. The new original at the dealer is 120,000 ₸. Repair by the master (replacement of the case + buttons + battery) — 8 000-15 000 ₸. Save 100,000+ ₸. Always contact a repairman first — only if repairs are not possible, order a new key.
Process

, How does professional key manufacturing work ?

The modern process is a combination of precise equipment, high—quality materials and the master's experience.

Diagnosis and selection of the workpiece

The master studiesthe original key: profile type, lock manufacturer, degree of wear. Selects the appropriate blank from the assortment (usually 500-2000 items are available). Special blanks can be ordered for rare locks.

2-5 minutes

Setting up the machine

The original is installed incopy clip The blank is in working order. A mechanical machine is used for simple keys, and a vertical CNC milling machine is used for complex perforated keys. It takes a few minutes to set up, but the accuracy depends on it.

3-8 minutes

Profile Slicing

The milling cutter copies the profile of the original onto the blank.Professional machines(Silca Futura, Keyline 605) have an accuracy of 0.01-0.02 mm. Cheap Chinese devices give an error of 0.1-0.3 mm, which is enough for the key to jam. After slicing, the wizard visually checks the profile.

3-15 minutes

Refinement and polishing

Burrs are removed, sharp edges are rounded for a smooth entrance to the castle. Mastergrinds the edgeswith a fine-grained circle or manually. It is especially important for lock and safe keys — the slightest burr will interfere with the operation of the lock.

2-5 minutes

Checking at the castle

Mandatory stage —real castle test(or similar). The key should enter smoothly, turn effortlessly, without backlash. If there are problems, fine—tuning on the machine to the ideal. A professional will not hand over the key without this check.

2-5 minutes

For car keys — programming

If it isChip Key or Smart Key after the mechanical part, there is an electronic one: the programmer writes the code into the chip, binds it to the car's ECU, adjusts the buttons. To do this, you need to connect to the OBD2 connector or work with the immobilizer unit directly.

15-90 minutes

Issuance and guarantee

The master hands the ready—made key to the client, explains the specifics of its use (for example, do not use a new duplicate as the main one for the first 2 weeks - let the lock work). Issued bywarranty cardfor 1-12 months, depending on the type of key.

2-3 minutes

Professional equipment

Silca Italy
Keyline Italy
Kaba Swiss
Ilco USA
Autel Auto
Xhorse Auto
VVDI Auto
Zed-Full Auto
Advanced USA
JMA Spain
Mul-T-Lock Israel
EVVA Austria
Guide of your choice

, How to choose a reliable master

The master's qualifications are critical: a bad duplicate can ruin an expensive lock.

Professional equipment

Ask which machine the master is working on. Good brands:Silca, Keyline, Kaba, Ilco, JMA(Italy, Switzerland, USA, Spain). Chinese noname machines are a red flag. Auto keys require Autel, Xhorse, and VVDI programmers. Having such equipment = a serious approach.

Assortment of blanks

A professional has it in stock500-2000 types of blanksfor all types of locks. If the master says "you need to order a blank, come back tomorrow" — this is not a pro. Serious workshops keep a full range. For rare locks, an order is possible, but standard locks must be available.

Checking in the lock is mandatory

The master mustcheck the new key in the real lockbefore delivery (or suggest that you bring your lock for testing). To give away the key without verification = the risk that it will not fit. This is the gold standard of professional work.

The guarantee for the work

The professional giveswarranty from 1 to 12 monthsfor making keys. For chip keys - from 6 months. If the key has stopped working during the warranty period, a free rework is provided. No guarantee = red flag.

Reviews and reputation

Read reviews on NATUMBE.KZ. Look for reviews aboutdurability of keys("it's been working like new for a year"), and not just about speed. Pay attention to the master's responses to negativity — how he solves problems. A rating below 4.5 is a reason to be wary.

Transparent prices

All prices must beposted in a prominent placeor listed in the price list. No "surprises" after work. The master immediately names the exact amount and explains what it consists of. Request a receipt or receipt.

Experience and specialization

Forcar keyslook for a master with this particular specialization — programming chips requires deep knowledge of electronics. Forsafe deposit box keys— a specialist with the experience of Mauer, Fichet, Stuv. Station wagons are good for apartment keys, but not for complicated cases.

Cleanliness and order

Pay attention toworkshop condition: cleanliness, order, organization. The blanks are laid out by type, the machines are well maintained. Clutter = the same approach to quality. A good workshop looks neat and professional.

🚨 Red flags — avoid such "masters":
  • He works at a stall/kiosk in the passage without a sign
  • Can't name the brand of the machine
  • Gives away the key without checking in the lock
  • Does not provide a guarantee or gives less than 1 month
  • There is no price list — he calls the price "from the ceiling"
  • Blanks of questionable quality (soft metal, without marking)
  • Reviews about the "jamming" of keys, breakdowns in the lock
  • The price is suspiciously low (2-3 times lower than the market)
Questions and answers

, Frequently asked questions about key manufacturing

Answers to the most popular questions from clients {region.in }

How much does it cost to make a duplicate key in {region.in }?

In 2026 in {region.in }:the usual English key — 500-1 500 ₸, profile with perforation — 1 500-3 000 ₸, suvaldny (safe deposit box) — 2 500-6 000 ₸, intercom system — 500-1 500 ₸, auto key without a chip — 3 000-8 000 ₸, The chip key — 15 000-60 000 ₸, Smart Key— 40 000-150 000 ₸. The exact price depends on the type of lock, the complexity of the profile, the material of the blank and the urgency.

Is it possible to make a key based on a broken sample?

Yes, an experienced craftsman can restore the key.even from a few pieces. The process is calleddecoding: the factory code is determined from the preserved fragments, and the key is cut from scratch on a CNC machine. For apartment locks, it costs 3,000—8,000 rubles, for car locks - 15,000 -50,000 rubles. If less than 60% of the profile is preserved, it may be necessary to disassemble the lock and read the pins directly, which increases the price. In any case, it'scheaper than replacing the entire lock.

How long does it take to make a key?

The time depends on the difficulty:the usual apartment— 5-15 minutes,profile with perforation— 15-25 minutes,suvaldny— 20-40 minutes,intercom system— 2-5 minutes,auto key without a chip— 15-30 minutes,a chip key with programming— 30-90 minutes,Smart Key— 1-3 hours.Production by code or VIN— 1-2 days (requires ordering blanks and access to manufacturers' databases). For urgent cases, many craftsmen work around the clock with an additional payment of 50-100%.

What should I do if I lost my last car key?

Don't panic — this is a solvable problem. MasterHe drives out to the car, opens the door without damage (through a sealer or a maggot with special tools), makes an impression or reads the lock code, makes a blade and programs a new chip. Cost:budget cars (Lada, Kia Rio) — 25 000-60 000 ₸, The middle class (Toyota, VW) — 40 000-90 000 ₸, premium(BMW, Mercedes) — 80 000-200 000 ₸. For the latest Mercedes FBS4 and BMW BDC, an order from a dealer is required — 200,000-450,000 rubles with a wait of 2-4 weeks.

Do I need to change the lock after losing the keys?

Absolutely!A lost key can get to unscrupulous people. Variants:1)replacement of the larva (cylinder) — 8,000-25,000 ₸,2)lock lock recoding — 15,000 -35,000 ₸ (old keys stop working),3)A complete replacement of the lock costs 25,000-80,000 rubles. The most budget—friendly option is to recode or replace the cylinder.Mandatory cases:theft of keys, loss of all copies, after the dismissal of the housekeeper / nanny, after the divorce, after the purchase of an apartment (the previous owners may have left copies).

Is it possible to make a key without the original?

Yes, there are several ways.: 1)By the lock code, it is indicated on the key card or in the documents.2)By car VIN (for car keys) — the code in the manufacturer's database.3)The master disassembles the lock, reads the pins and makes the key from scratch. The cost starts from 5,000 rubles for apartments and 20,000 rubles for cars. Thismore expensive than a regular duplicate but the only solution is to lose all the keys. This is the only way for safe deposit boxes and premium locks, as manufacturers do not issue codes to third parties.

How much does it cost to repair an auto key?

Repairs are 3-10 times cheaper than a new key:replacing the keychain case — 5 000-15 000 ₸, soldering micro buttons — 3 000-8 000 ₸, battery replacement — 1 500-3 000 ₸, repair of the flip-out mechanism — 4 000-12 000 ₸, chip replacement — 10 000-30 000 ₸, blade recovery — 5 000-20 000 ₸. An example of saving money:the original Toyota Camry Smart Key at the dealer is 120,000 rubles, the repair of the case and buttons at the master is 12,000 rubles. Save 108,000 ₸!

Why does the duplicate key not work well?

The main reasons:1)Poor machine quality — cheap copiers give an error of up to 0.3 mm, which causes the key to jam.2)Worn—out original - if you copy from an erased key, the duplicate will be even worse (the "copy copy" effect).3)A bad blank is a soft metal of unknown origin that quickly wears off and breaks in the lock.Decision:contact craftsmen with professional machines (Silca, Keyline) and copy from a good original. If the original is worn out, the wizard can restore the factory settings using the code.

Is it possible to make a duplicate from a key that has copy protection?

Depends on the type of protection.Proprietary profiles (Mul-T-Lock Interactive, EVVA 3KS, Kaba quatt) havelegal protection— blanks can only be purchased from authorized dealers upon presentation of the owner's key card and passport. This is done for security. If you have the documents, a duplicate will be made at the official center. Some "wizards" circumvent the protection illegally — avoid such, it creates risks for you. There is usually no auto-key protection, but special blanks and programmers are needed.

What should I do if the key is broken inside the lock?

Do not try to get the chip yourselfWith pliers or a screwdriver, you can push it deeper and damage the pins. Call the master key keeper: he hasspecial extractors— thin hooks that hook the chip and pull it out without damaging the lock. The cost is 5,000-15,000 ₸. If the fragment gets intact, you can make a duplicate of it. If the fragment is destroyed, make a new key using the code or disassemble the lock. Anywaycheaper than replacing the entire lock.

How many duplicates does it cost to have?

Quantity recommendations: Flat— at least 3-4 keys (for each family member + 1 spare key at relatives/office).Car— at least 2 keys, one to keep at home in a safe place.Safe deposit— 2 keys in different secure locations.Intercom system— 2-3 key rings (the loss of one is not critical).Important:for cars, loss of the last key = recovery from 25,000 ₸, soa duplicate is required. Keep your spare keys indifferent places— not everyone is at home (in case of fire/theft).

Is it possible to make a key based on a photo?

Yes, modern technology allows it.The wizard analyzes a high-resolution photo of the key, determines the profile, number and depth of cuts, and makes a duplicate. 95-98% accuracy — sometimes a little refinement is required. It is used when the original is unavailable (for example, the landlord has the key and you want to make a duplicate). The cost is 2-3 times higher than the usual duplicate — 3,000-15,000 ₸.Security Warning:the same technology is used by thieves — do not post photos of keys on social networks! Even a photo on the table can be enough to make a duplicate.

Reviews

, What customers say {region.in }

Real stories of people who found a reliable master through NATUMBE.KZ

★★★★★

"I lost the last key to the Toyota Camry — panic! I found a master on NATUMBE.KZ, arrived in 40 minutes, carefully opened the door, and made a new chip key in 2 hours. 48,000 ₸ is expensive, but the dealer asked for 140,000. It has been working perfectly for a year now. Thank you!"

А
Askar M. Toyota Camry, in Kazakhstan
★★★★★

"I made duplicate keys to the new apartment — the Italian Cisa lock. The master at the Silca machine made 4 keys in 30 minutes. The quality is like the original, they fit perfectly. 12,000 ₸ for everything. At the kiosk near the subway, they asked for 2,000 for one, but I was afraid. You did the right thing!"

Д
Dinara K. Apartment keys, {region.in }
★★★★★

"The case of the BMW X5 key cracked, the buttons stuck. The dealer is only a replacement for 180,000 ₸. The wizard at NATUMBE.KZ replaced the case, soldered the buttons, and changed the battery. 14,000 ₸ and an hour of work. Savings — 166,000 ₸! A professional!"

Е
Erlan T. BMW X5, in Kazakhstan
★★★★★

"After the divorce, I decided to recode the lock on the front door. The ex-husband had the keys. The master recoded the lock lock in 40 minutes and issued a new set. 18 000 ₸. Now I'll calm down — the old keys don't fit. I recommend it to everyone in a similar situation!"

М
Marina S. Lock recoding, {region.in }
★★★★★

"I broke the key in the lock of the safe at work — horror! I called the wizard via NATUMBE.KZ. Carefully took out the chip with an extractor, made a new key according to the pattern. 8,500 ₸ and an hour of work. Mauer safe, German — I thought I'd have to change it for 300,000. Saved me!"

О
Oleg P. A safe deposit box key {region.in }
★★★★★

"We made 10 intercom keyfobs for our company — for each employee. The master arrived at the office and did everything in 20 minutes. 8,000 ₸ for everything. The quality is excellent, they work perfectly. I will contact you again."

С
Serik B. Intercom keys, {region.in }
, Statistics NATUMBE.KZ:for the last year in {region.in } more than95,000 keys. Average receipt —8 500 ₸. 97% of customers are satisfied with the quality. Top services: duplicate apartment keys (42%), auto keys with a chip (28%), intercom key rings (15%), auto key repair (9%), recovery in case of loss (4%), safe keys (2%).

, Find your master right now

0 listings trusted specialists {region.in }. Professional machines, high-quality blanks, a guarantee for all work. Duplicates of any complexity — from simple apartment cars to Smart Key premium cars.

The key is a little guardian of your peace of mind. Trust its manufacture only to professionals, and it will serve you faithfully for years. Saving on quality in this case always turns into a much bigger expense.— The NATUMBE.KZ team
Note: NATUMBE.KZ is an information platform for finding key makers. We do not provide services directly and are not responsible for the quality of work of specific performers. Before ordering, we recommend checking the reviews, the availability of professional equipment (Silca, Keyline) and warranty conditions. Prices are indicated approximately in tenge (₸) for September 2026 and may vary depending on the type of key, the complexity of the lock and the brand of car. The contractor is responsible for the quality of the work. Remember: always have at least 2 car keys and do not post photos of them on social media.
Back to Top