Reinforced concrete products braces Moscow
10 000 ₸
Reinforced concrete products braces Moscow
№270733 Created: January 22
RC braces Moscow
RC braces
RC braces
RC braces
RC braces
RC braces
RC braces
RC braces
RC braces
RC braces
RC braces
RC braces
RC braces
RC braces
RC braces
RC braces
RC braces
RC braces
RC braces
RC braces
Reinforced concrete braces
Name Length min-max, m Weight, kg
RC brace 1.7-2.5 hook-hook 1.7-2.5 12.8
RC brace 2.1-2.9 hook-hook 2.1-2.9 14.5
RC brace 2.5-4.3 hook-hook 2.5-4.3 19.5
RC brace 2.5-4.3 hook-heel 2.5-4.3 20.3
Reinforced concrete strut 4.2-6.0 hook-hook 4.2-6.0 26.7
Reinforced concrete strut 4.2-6.0 hook-heel 4.2-6.0 27.5
Reinforced concrete strut 5.5-7.0 hook-heel 5.5-7.0 51.2
Reinforced concrete strut 4.4-6.4 hook-heel 3.5-6.0 29.2
Reinforced concrete strut 4.4-6.4 hook-hook 4.4-6.4 28.4
Reinforced concrete strut 5.2-7.0 hook-heel 5.2-7.0 31.7
Reinforced concrete strut 2.5-4.3 shoe-heel 2.5-4.3 22
Reinforced concrete struts are used for installation of reinforced concrete columns in frame-monolithic housing construction or panels in panel housing construction. Reinforced concrete columns or panels are installed in the design position by twisting the body of the installation strut around its axis. The adjustment range is usually 800 mm. The reinforced concrete strut consists of a closed body, upper and lower threaded parts. The execution of the threaded parts can be different: hook, anchor, heel, hole.
Hook-hook strut
Hook-hook RC strut
A hook-hook RC strut is a strut that consists of a closed body and two screw parts in a hook-hook design. These struts are more optimal for installation of assembly elements.
Hook-heel RC brace
Hook-heel RC brace
A hook-heel RC brace is a RC brace that consists of a closed body and two screw parts in a hook-heel design.
Heel-heel RC brace
Heel-heel RC brace
A heel-heel RC brace is a RC brace that consists of a closed body and two screw parts in a heel-heel design.
Screw brace
Screw brace for RC
Screw brace for RC is used as a support element for a column and vertical formwork during construction and installation work. The design of the screw brace allows you to adjust its length. The device of the brace hook locks allows you to securely fasten the brace to the column or formwork and securely hold them in a vertical position, the lower end with the help of a heel or hook, for two holes on the floor slab, which is enough for reliable fixation. The brace length is adjusted by means of the screw part of the retractable pipe. The screw part is securely fixed with a bolted connection. Smooth adjustment of the brace rod length is provided by the right and left screws at opposite ends of the brace. The adjustment is made by rotating the brace rod by the handle welded to the rod.
Screw brace PVM 3000
Screw brace PVM 1700-2400 Screw brace PVM 1700-2400 (hook-hook)
Brace characteristics:
permissible load no more than - 800 kg;
brace length, max - 2400 mm;
brace length, min - 1700 mm;
brace length adjustment value - 700 mm;
brace weight - 12 kg.
The brace is designed to support and align reinforced concrete products.
Screw brace PVM 4000
Screw brace PVM 2500-3800 Screw brace PVM 2500-3800 (hook-hook)
Brace characteristics:
permissible load no more than - 800 kg;
brace length, max - 3800 mm;
brace length, min - 2500 mm;
brace length adjustment value - 1300 mm;
brace weight - 16 kg.
The brace is designed to support and align reinforced concrete products.
The screw assembly brace (braces) is used as a support element for columns and vertical formwork during construction and installation work. The screw brace allows you to set up columns and formwork with the accuracy required for such work, and ensures their safe fastening during production. Braces are also used to adjust panels during their installation and fixation in the working position.
Mounting braces
Mounting brace for reinforced concrete products
The mounting brace is a piece of construction equipment. The main purpose of the mounting brace is temporary fastening and alignment of wall panels during their subsequent installation. The mounting brace is a mounting tool, the method of its operation is based on linear compression. The mounting brace allows you to quickly, conveniently and safely perform various operations on temporary fastening of prefabricated elements. This fact allows, in turn, to increase their durability until they are thoroughly fixed according to the project, eliminates the possibility of jamming of these elements and their spontaneous unfastening. The bearing parts of the mounting slope are manufactured strictly in compliance with GOST standards, since all its parts must have a certain safety factor under load. The structure of the mounting braces is telescopic.
Mounting brace PM for reinforced concrete
Name Length min-max, mm Weight, kg
Mounting brace PM 2500 L=2100-2900 mm 2100-2900 -
Mounting brace PM 3000 L=2600-3400 mm 2600-3400 -
Mounting brace PM 3500 L=3100-3900 mm 3100-3900 -
Mounting brace PM 4000 L=3600-4400 mm 3600-4400 -
Mounting brace PM 4500 L=4100-4900 mm 4100-4900 -
Mounting brace PM 5000 L=4600-5400 mm 4600-5400 -
Mounting brace PM 6000 L=5600-6400 mm 5600-6400 -
Mounting brace PM 7000 L=6600-7400 mm 6600-7400 -
Mounting brace PM 8000 L=7600-8400 mm 7600-8400 -
Panel brace
Mounting braces for wall panels
Mounting brace for panels
Mounting brace for panelsMounting brace for wall panels
Mounting braces are the most widely used mounting equipment for fastening and aligning vertical assembly elements (external and internal walls and partitions) of buildings. Alignment and installation of assembly elements in the design position is carried out due to the stroke of 300 - 500 mm of the adjusting screw. The upper end of the mounting brace is attached to mounting loops, anchors or with a RC clamp. And the lower end of the brace is attached to the floor slabs through specially provided holes or through an anchor.
Column brace
Reinforced concrete column brace
Brace for mounting columns
Brace for columns Brace for mounting reinforced concrete columns
Reinforced concrete column braces are the most widely used assembly equipment for fixing and aligning reinforced concrete columns of monolithic-frame buildings. Braces usually have a telescopic design that allows you to change their length. Alignment and installation of assembly elements in the design position is carried out with an adjusting screw. Various gripping devices are provided for fixing the upper and lower ends of the braces. The upper end of the brace is attached to the ferrule of the reinforced concrete column, and the lower end to the slab (plane) of the floor.
At the customer's request, we manufacture assembly braces of different lengths and mounting options.
Shipping across the Russian Federation. Free delivery to the TC terminal. In-house production of construction equipment and lifting equipment. Wide range of construction equipment (column mounting crossbeam, conductor, clamp, etc.) For more detailed information, please contact our specialists.
Delivery to Moscow, Moscow Region and Russian Federation:
Saint Petersburg, Novosibirsk, Yekaterinburg, Kazan, Nizhny Novgorod, Chelyabinsk, Krasnoyarsk, Samara, Ufa, Rostov-on-Don, Omsk, Krasnodar, Voronezh, Perm, Volgograd, Saratov, Tyumen, Tolyatti, Barnaul, Izhevsk, Makhachkala, Khabarovsk, Ulyanovsk, Irkutsk, Vladivostok, Yaroslavl, Kemerovo, Tomsk, Naberezhnye Chelny, Sevastopol, Stavropol, Orenburg, Novokuznetsk, Ryazan, Penza, Yaroslavl, etc.
RC braces
RC braces
RC braces
RC braces
RC braces
RC braces
RC braces
RC braces
RC braces
RC braces
RC braces
RC braces
RC braces
RC braces
RC braces
RC braces
RC braces
RC braces
RC braces
Reinforced concrete braces
Name Length min-max, m Weight, kg
RC brace 1.7-2.5 hook-hook 1.7-2.5 12.8
RC brace 2.1-2.9 hook-hook 2.1-2.9 14.5
RC brace 2.5-4.3 hook-hook 2.5-4.3 19.5
RC brace 2.5-4.3 hook-heel 2.5-4.3 20.3
Reinforced concrete strut 4.2-6.0 hook-hook 4.2-6.0 26.7
Reinforced concrete strut 4.2-6.0 hook-heel 4.2-6.0 27.5
Reinforced concrete strut 5.5-7.0 hook-heel 5.5-7.0 51.2
Reinforced concrete strut 4.4-6.4 hook-heel 3.5-6.0 29.2
Reinforced concrete strut 4.4-6.4 hook-hook 4.4-6.4 28.4
Reinforced concrete strut 5.2-7.0 hook-heel 5.2-7.0 31.7
Reinforced concrete strut 2.5-4.3 shoe-heel 2.5-4.3 22
Reinforced concrete struts are used for installation of reinforced concrete columns in frame-monolithic housing construction or panels in panel housing construction. Reinforced concrete columns or panels are installed in the design position by twisting the body of the installation strut around its axis. The adjustment range is usually 800 mm. The reinforced concrete strut consists of a closed body, upper and lower threaded parts. The execution of the threaded parts can be different: hook, anchor, heel, hole.
Hook-hook strut
Hook-hook RC strut
A hook-hook RC strut is a strut that consists of a closed body and two screw parts in a hook-hook design. These struts are more optimal for installation of assembly elements.
Hook-heel RC brace
Hook-heel RC brace
A hook-heel RC brace is a RC brace that consists of a closed body and two screw parts in a hook-heel design.
Heel-heel RC brace
Heel-heel RC brace
A heel-heel RC brace is a RC brace that consists of a closed body and two screw parts in a heel-heel design.
Screw brace
Screw brace for RC
Screw brace for RC is used as a support element for a column and vertical formwork during construction and installation work. The design of the screw brace allows you to adjust its length. The device of the brace hook locks allows you to securely fasten the brace to the column or formwork and securely hold them in a vertical position, the lower end with the help of a heel or hook, for two holes on the floor slab, which is enough for reliable fixation. The brace length is adjusted by means of the screw part of the retractable pipe. The screw part is securely fixed with a bolted connection. Smooth adjustment of the brace rod length is provided by the right and left screws at opposite ends of the brace. The adjustment is made by rotating the brace rod by the handle welded to the rod.
Screw brace PVM 3000
Screw brace PVM 1700-2400 Screw brace PVM 1700-2400 (hook-hook)
Brace characteristics:
permissible load no more than - 800 kg;
brace length, max - 2400 mm;
brace length, min - 1700 mm;
brace length adjustment value - 700 mm;
brace weight - 12 kg.
The brace is designed to support and align reinforced concrete products.
Screw brace PVM 4000
Screw brace PVM 2500-3800 Screw brace PVM 2500-3800 (hook-hook)
Brace characteristics:
permissible load no more than - 800 kg;
brace length, max - 3800 mm;
brace length, min - 2500 mm;
brace length adjustment value - 1300 mm;
brace weight - 16 kg.
The brace is designed to support and align reinforced concrete products.
The screw assembly brace (braces) is used as a support element for columns and vertical formwork during construction and installation work. The screw brace allows you to set up columns and formwork with the accuracy required for such work, and ensures their safe fastening during production. Braces are also used to adjust panels during their installation and fixation in the working position.
Mounting braces
Mounting brace for reinforced concrete products
The mounting brace is a piece of construction equipment. The main purpose of the mounting brace is temporary fastening and alignment of wall panels during their subsequent installation. The mounting brace is a mounting tool, the method of its operation is based on linear compression. The mounting brace allows you to quickly, conveniently and safely perform various operations on temporary fastening of prefabricated elements. This fact allows, in turn, to increase their durability until they are thoroughly fixed according to the project, eliminates the possibility of jamming of these elements and their spontaneous unfastening. The bearing parts of the mounting slope are manufactured strictly in compliance with GOST standards, since all its parts must have a certain safety factor under load. The structure of the mounting braces is telescopic.
Mounting brace PM for reinforced concrete
Name Length min-max, mm Weight, kg
Mounting brace PM 2500 L=2100-2900 mm 2100-2900 -
Mounting brace PM 3000 L=2600-3400 mm 2600-3400 -
Mounting brace PM 3500 L=3100-3900 mm 3100-3900 -
Mounting brace PM 4000 L=3600-4400 mm 3600-4400 -
Mounting brace PM 4500 L=4100-4900 mm 4100-4900 -
Mounting brace PM 5000 L=4600-5400 mm 4600-5400 -
Mounting brace PM 6000 L=5600-6400 mm 5600-6400 -
Mounting brace PM 7000 L=6600-7400 mm 6600-7400 -
Mounting brace PM 8000 L=7600-8400 mm 7600-8400 -
Panel brace
Mounting braces for wall panels
Mounting brace for panels
Mounting brace for panelsMounting brace for wall panels
Mounting braces are the most widely used mounting equipment for fastening and aligning vertical assembly elements (external and internal walls and partitions) of buildings. Alignment and installation of assembly elements in the design position is carried out due to the stroke of 300 - 500 mm of the adjusting screw. The upper end of the mounting brace is attached to mounting loops, anchors or with a RC clamp. And the lower end of the brace is attached to the floor slabs through specially provided holes or through an anchor.
Column brace
Reinforced concrete column brace
Brace for mounting columns
Brace for columns Brace for mounting reinforced concrete columns
Reinforced concrete column braces are the most widely used assembly equipment for fixing and aligning reinforced concrete columns of monolithic-frame buildings. Braces usually have a telescopic design that allows you to change their length. Alignment and installation of assembly elements in the design position is carried out with an adjusting screw. Various gripping devices are provided for fixing the upper and lower ends of the braces. The upper end of the brace is attached to the ferrule of the reinforced concrete column, and the lower end to the slab (plane) of the floor.
At the customer's request, we manufacture assembly braces of different lengths and mounting options.
Shipping across the Russian Federation. Free delivery to the TC terminal. In-house production of construction equipment and lifting equipment. Wide range of construction equipment (column mounting crossbeam, conductor, clamp, etc.) For more detailed information, please contact our specialists.
Delivery to Moscow, Moscow Region and Russian Federation:
Saint Petersburg, Novosibirsk, Yekaterinburg, Kazan, Nizhny Novgorod, Chelyabinsk, Krasnoyarsk, Samara, Ufa, Rostov-on-Don, Omsk, Krasnodar, Voronezh, Perm, Volgograd, Saratov, Tyumen, Tolyatti, Barnaul, Izhevsk, Makhachkala, Khabarovsk, Ulyanovsk, Irkutsk, Vladivostok, Yaroslavl, Kemerovo, Tomsk, Naberezhnye Chelny, Sevastopol, Stavropol, Orenburg, Novokuznetsk, Ryazan, Penza, Yaroslavl, etc.
№270733 Created: January 22
10 000 ₸