Kitchen furniture in Astana

What the kitchen body is made of: chipboard, MDF or solid wood

Housing (frame)

• Moisture-resistant chipboard: The standard for the middle segment. It is important that the stove is moisture-resistant (marked on the manufacturer's label), otherwise the stove will start to swell after a year or two from constant steam and splashing water at the sink.
• Plate thickness: For the lower cabinets under the sink and the hob, you need a stove from 16 mm — thinner than that will not withstand load and humidity.

Facades

• Chipboard with PVC film: It's a budget option, but the film on the corners can eventually peel off from the heat (especially near the stove).
• MDF with enamel or film: More expensive, but stronger, milling (relief) lasts for years, enamel is resistant to grease and easy to clean.
• An array of trees: Premium, the most durable, but requires careful care and is significantly more expensive.

🪨 Countertop: what the main kitchen budget is spent on

• Chipboard with postforming: The most affordable option, the edge is sealed using the postforming method (without joints on the side). Plus, the low price. The disadvantage is that it is afraid of prolonged contact with water at the sink, if the sealant on the edge of the sink has worn off over time, the plate begins to swell.
• Acrylic Stone: It has no seams, is hygienic, scratches can be sanded, the surface is always warm to the touch. Minus — it is afraid of very hot dishes without a stand, it can deform during spot heating.
• Quartz agglomerate: The countertop is almost eternal, resistant to scratches, high temperature and stains (wine, turmeric, coffee are not absorbed). The disadvantage is that it is one of the most expensive, the seams are visible (unlike acrylic), heavy, and requires a reinforced frame.

Accessories: an inconspicuous detail that solves everything

• Loops: Look for famous brands — Blum, Boyard, Hettich. They have depth, height and width adjustments, and most importantly, an opening life of up to 50,000 cycles (this is more than 10 years of intensive use). Cheap nouname hinges lose their smoothness and begin to sag the facade after a year of active use.
• Drawer guides: Ball telescopic guides with a door closer (soft-close) are a sign of a high—quality kitchen. Cheap roller guides quickly loosen and warp the drawer, they should be avoided.
• Push-to-open system: It is convenient for kitchens without handles — I pressed on the facade, and the drawer opened. But it is mechanically more complicated than conventional handles and requires careful operation, and it can become loose over time.
• Lifts for upper cabinets: Gas elevators are convenient, but cheap Chinese analogues fail after a year (the gas goes out, the elevator stops holding the facade).

🔍 We check the used kitchen before buying: buyer's checklist

1. Doors and facades 🚪

• Check the geometry of the facades to see if there is any distortion in the closed position.
• Open and close each door 5-6 times — the hinges should not creak, the movement should be smooth.
• Look at the corners of the facades to see if the film is swollen (if it is chipboard with PVC film).

2. Tabletop condition 🪨

• Inspect the countertop joints at the sink — this is the weakest point.
• If you see dark spots or swelling in the washing area, the stove has already swollen from the water, and this defect will only progress.
• Check the joints of the countertop parts (usually the seam runs through the center of the corner kitchen) to see if there is a gap, if dirt has clogged there.

3. The internal condition of the cabinets

• Open the door under the sink and look inside. If there is a rotten smell, mold or a swollen bottom, it is better to pass by.
• Check the fittings inside (shelf holders, screeds) for rust or broken plastic parts.

4. Drawers 🗄️

• Pull out the drawer to the end — it should not bite or warp.
• Look at the guides: if there are traces of grease on them and they are metal (ball—shaped), this is a good sign.
• Plastic roller guides without lubrication and with backlash — I do not recommend buying.

5. General geometry 📐

• If the kitchen is angular or has a non-standard configuration, be sure to check your room dimensions with the dimensions of the headset.
• Measure the height of the baseboard (plinth) — if you have changed the floor covering, the height may not match.

🆕 New kitchen or used: what to choose?

When is it profitable to buy a new kitchen

• You are making repairs from scratch and plan to live in this apartment for at least 10+ years.
• You have a non-standard layout (niches, ledges, non-standard ceiling height).
• You want to choose the color, material, and fittings to suit your taste, rather than adapt to someone else's choice.

When it makes sense to look at a used car

• You have a standard standard layout (many used headsets fit perfectly into apartments of standard series).
• You're in a rented apartment and you want to put up a decent kitchen without a lot of investment.
• You have found an offer from people who renovated 2-3 years ago, move in and sell the set for 30-40% of the original cost — while the furniture is practically new.
• The budget is limited — for the same amount as the cheapest new set in a chain store, you take a good headset made of high-quality materials.

FAQ: Frequent questions from kitchen buyers

Why is it profitable to buy and sell kitchens on NATUMBE.KZ?

• 📍 Without cheating the store. You communicate directly with the seller, the owner of the headset, or a representative of a small workshop that does not spend millions on rent and advertising.
• 🛍️ Hundreds of options nearby. Filter by price, color, condition (new/ used) and area in Astana. It will take a couple of minutes to choose between an array of walnut and a white gloss.
• 💬 Haggling is welcome. For most private sellers, the price in the ad is the start for negotiations. A couple of polite chat messages and you leave the kitchen 15-20% cheaper.
• 📸 Real photos. On the platform, sellers post their photos in natural light — you see the real condition, not photoshopped pictures from the catalog.

What is the right way to put your kitchen up for sale if you are moving?

1. Do the cleaning. It's amazing how many people put up dirty headsets with greasy facades. Wiping with a damp cloth and detergent doubles the price of perception.
2. Take a photo in daylight. The flash distorts the colors. The best time is in the morning or afternoon, when the light falls from the side, not from above.
3. Specify the exact dimensions (length, height, depth). This cuts off empty calls from those for whom the kitchen does not fit in size.
4. Write honestly about the condition. If there are minor defects (a chip on the countertop, a trace of steam on the facade of the stove) — indicate this in the description. An honest seller gets more trust and sells faster.

Bottom line: your kitchen is waiting for you