Gutter machine (square
15 ₸
Gutter machine (square
№267975 Created: February 25
Main characteristics
Metal thickness：0.3--0.6mm Galvanized
Metal processing width: according to drawing
Production speed：10--15m/min
Number of working stands：16 stands
Cage diameter：Φ70mm solid
Production technology and line composition:
1．Electric unwinder*1pc
Designed for continuous feeding of strip from a roll to a rolling mill.
Roll inner diameter: 508-620mm,
Axial load: 3t Power: 1.5kw
2. Metal insertion plate
We will place galvanized steel on this plate for processing to ensure that the finished corrugated sheet is flat, parallel and identical.
3. Roll forming mill
Designed for sequential bending and forming of rolled strip to the required profile configuration. The frame of the rolling mill is equipped with forming stands, profile guillotine shears, a guiding filling device, and an electric drive.
Power: 5.5kW
Driving mode: chain drive (1.0inch）
Equipment bed: 300 H-shaped profile,
Shaft diameter and material: Ф70mm solid shafts, 45# improved steel HB220-250.
Roller material: 45# high quality forged steel, precision turning, polishing with 0.05mm chrome plating.
Gararita 8500*800*1500mm Weight 4 tons
4.Cutting device (automatic)
Mounted on the rolling mill frame. The figured knife provides a high-quality cut of the required length.
Cr12 material
Cutting mode: hydraulic cutting
5.Hydraulic press system
Application of fuel pump gears in control， introduction of hydraulic mixture into the hydraulic cylinder of the cutting device system to drive the cutting device to cut metal.
Hydraulic mixture norm: 46#
Power:4kw
6.SPG:
- ensures smooth start-stop of the line (starting the line without jerking
-no slipping of the rolling mill, no sudden tension of chains;
- there are no starting currents that cause breakdowns of the electrical circuit);
- ensures long service life (gentle mode);
-increasing productivity and improving the quality of products (lack of human factor);
- ensures cutting accuracy along the length of +1mm per 6m profile;
-Russian, English menu.
7.Reception table
Designed for receiving measuredly cut sheets of corrugated sheets from rolling mill shears and forming packs of the finished profile. The length of the stacker is at the request of the Customer. Only 2 pieces. length 3 meters.
Metal thickness：0.3--0.6mm Galvanized
Metal processing width: according to drawing
Production speed：10--15m/min
Number of working stands：16 stands
Cage diameter：Φ70mm solid
Production technology and line composition:
1．Electric unwinder*1pc
Designed for continuous feeding of strip from a roll to a rolling mill.
Roll inner diameter: 508-620mm,
Axial load: 3t Power: 1.5kw
2. Metal insertion plate
We will place galvanized steel on this plate for processing to ensure that the finished corrugated sheet is flat, parallel and identical.
3. Roll forming mill
Designed for sequential bending and forming of rolled strip to the required profile configuration. The frame of the rolling mill is equipped with forming stands, profile guillotine shears, a guiding filling device, and an electric drive.
Power: 5.5kW
Driving mode: chain drive (1.0inch）
Equipment bed: 300 H-shaped profile,
Shaft diameter and material: Ф70mm solid shafts, 45# improved steel HB220-250.
Roller material: 45# high quality forged steel, precision turning, polishing with 0.05mm chrome plating.
Gararita 8500*800*1500mm Weight 4 tons
4.Cutting device (automatic)
Mounted on the rolling mill frame. The figured knife provides a high-quality cut of the required length.
Cr12 material
Cutting mode: hydraulic cutting
5.Hydraulic press system
Application of fuel pump gears in control， introduction of hydraulic mixture into the hydraulic cylinder of the cutting device system to drive the cutting device to cut metal.
Hydraulic mixture norm: 46#
Power:4kw
6.SPG:
- ensures smooth start-stop of the line (starting the line without jerking
-no slipping of the rolling mill, no sudden tension of chains;
- there are no starting currents that cause breakdowns of the electrical circuit);
- ensures long service life (gentle mode);
-increasing productivity and improving the quality of products (lack of human factor);
- ensures cutting accuracy along the length of +1mm per 6m profile;
-Russian, English menu.
7.Reception table
Designed for receiving measuredly cut sheets of corrugated sheets from rolling mill shears and forming packs of the finished profile. The length of the stacker is at the request of the Customer. Only 2 pieces. length 3 meters.
№267975 Created: February 25
