Special sanitizing enamel paint - Plastik Farbe Sanier. "Kaiser"

Glossy dispersion paint for interior and exterior use. Antibacterial. Abrasion resistant. Super washable. Type of material Silk matt water-based acrylate paint, which forms a coating resistant to abrasion, for outdoor and indoor use. Prevents the growth of bacteria, i.e. no special biocidal additives are required. Ideal for painting rooms that require constant sanitary cleanliness and sterility, such as kindergartens, hospitals, surgical rooms. In rooms with high or variable humidity does not support the formation of fungus and mold. Ideal for fiberglass, coarse-fiber and structural wallpaper, concrete, plaster and plaster surfaces, metal surfaces, etc. White color. Gloss level Silky-glossy. Composition Water, synthetic acrylic dispersion, titanium dioxide, fillers, additives, preservative. Density Approximately 1.3 g/cm3. Application Brush, roller, airless spray (nozzle 0.026 to 0.031 inch or 0.66 to 0.79 mm, pressure 6-8 atm., spray angle 40 - 80°). Properties Resistant to repeated abrasion and washing with chemical detergents, durable, i.e. has a long service life. Possesses elasticity, withstands stretching up to 50%. Does not contain solvents. Easy to process, high hiding power, easy to clean. Very economical. Forms strong silky-glossy surfaces, lightfast. It has good vapor permeability, that is, it allows the base to “breathe”. Substrate Preparation The paint can be applied to all sound substrates, they must be clean, dry and solid. Old adhesive whitewash must be completely removed. Prime fresh cement-based plaster and repaired areas. Treat heavily absorbent and chalked surfaces with Kaizer's Tiefgrund LF primer, gypsum plaster with Kaizer's Putzgrundharter 1:4 primer. Painting procedure 1st (primer) coat: dilute the paint with a maximum of 10% water. 2nd (final) coating: if possible, do not dilute. When painting, ensure that the material is evenly applied. Tinting Any water-dispersion color of the Kaizer brand. Cleaning tools Rinse with water immediately after use. Storage Store in a cool and dry place, but protected from frost. Opened and partially used packaging should be kept tightly closed. Shelf life in the original packaging of the manufacturer is 12 months. Packing 1kg, 5 kg, 10 kg Consumption 130 g of paint is enough for approximately 1 m2 in one layer on a smooth surface, depending on the quality of the base, deviations are possible. On rough surfaces, cullet, respectively, more, approximately 180-200gr/m. The most reliable method for accurately determining consumption is trial painting. Drying time At room temperature + 20 °C re-coating is possible on the same day after 2-3 hours. At cool temperatures, the drying time increases accordingly.