I will sell fiberboard Russia

contact numbers 87010813020 87017679926 87010813007 87015193956 Advantages: excellent sheathing material for cladding frame partitions, walls, ceilings, floors of residential buildings, for the manufacture of doors, built-in wardrobes, furniture production, laminated parquet, container production. size 2745*1700 Thickness, mm 2.5 Production technologies: There are two main methods for the production of fiberboard boards - dry and wet. Wet method - wood fiber mass is created in the aquatic environment, then a fiberboard sheet is made from cut strips at 70% humidity by hot pressing. This is the most environmentally friendly way to make fiberboard plywood. In the dry method, the wood fiber mass is formed in an air environment, and the canvas is pressed at a moisture content not exceeding 8%. There are also two intermediate methods - semi-dry and wet-dry. The semi-dry method involves the formation of dried wood pulp in air and hot pressing of fiberboard sheets at 18% humidity. The wet-dry method is the manufacture of wood fiber mass in an aqueous medium, followed by drying and hot pressing of the dried canvases, at a humidity close to zero. Classification of fiberboard: Depending on the density, there are the following types of fiberboard: superhard, hard, semi-hard, soft. On one or both sides, a fiberboard sheet can be coated with a film material or painted. Depending on the facing material, the plates are fireproof, moisture resistant or sound-absorbing. Fiberboard has a dense uniform surface. The material does not need to be further processed or polished, it is well milled. Due to its properties, wood fiber boards are widely used in construction and industrial production.