Facade Paint 10 Year Warranty

NEOCHIM rubber paint is designed for protective and decorative painting of slate, roof tiles, ondulin, galvanized steel, aluminum, primed and unprimed ferrous metal, corrugated board, asphalt, asbestos cement, concrete, foam and aerated concrete, brick, plastered, puttied surfaces, plywood, chipboard, DSP, fiberboard, wooden, plasterboard surfaces, surfaces covered with wallpaper, etc. For interior and exterior use. NEOCHIM rubber paint is suitable for painting roofs, plinths, building facades, downpipes and gutters, bathroom walls, brickwork and masonry, corridors, kitchens, poles, fences and other surfaces. The paint can be applied on surfaces previously painted with alkyd and oil paints. Properties: environmentally friendly product increased resistance to atmospheric influences, mechanical stress, ultraviolet radiation, temperature extremes high elasticity of the coating good adhesion (sticks to most surfaces) resistant to cracking resistant to intensive repeated washing (wet abrasion resistance - class 1 according to DSTU EN 13300 ) vapor permeable, easy to apply and dries quickly Characteristics: Thinner: water (no more than 5% by weight of the paint) Gloss level: matte Application method: brush, roller, spray gun Consumption rate in one layer: 100 - 200 g / m? Drying time of one layer: no more than 2 hours (at a temperature of (20±2)°C and relative humidity (65±5)% Guaranteed shelf life: 12 months from the date of manufacture Storage conditions: store in a tightly closed container of the manufacturer at a temperature of + 5 ?С to +35 ?С, protecting from moisture, direct sunlight and frost Surface preparation When painting the surface must be clean and dry, thoroughly cleaned of fragile coatings, dust, dirt, rust, scale, oil, grease and other contaminants How to use Before applying, mix the rubber paint thoroughly, if necessary, dilute with water, but not more than 5% of the weight of the paint.Apply the paint with a brush, roller or spray gun in 2-3 layers with intermediate drying at a temperature of +10? C to +30? C and relative air humidity not more than 80%.Apply the next layer after complete drying of the previous one.The time of complete drying of one coating layer at a temperature of (20±2) ?С and relative air humidity (65±5)% is 2 hours. Paint consumption for a single-layer application ranges from 100 g/m2 to 200 g/m2, depending on the absorbency of the treated surface and the method of application. Drying time 2 hours order by phone 87772110002 Whats app