Soft roof Bikrost. From manufacturing plants

ALWAYS AVAILABLE!!! BIKROST Roofing Bikrost is one of the affordable varieties of rolled materials, which is noticeably higher quality than, say, ordinary roofing material. The main purpose of such a roof is to protect residential or industrial buildings from moisture and damage to ceilings, load-bearing structures and other property. It is worth noting that bicrost is most preferable in the case of flat or slightly sloping roofs. The following examples of the use of this material can be mentioned: arrangement of the upper or lower layers of the roof, providing waterproofing of load-bearing structures in large engineering structures - bridges, tunnels and others, replacing old roofing materials whose service life has expired, laying on a hard subfloor in rooms that need additional waterproofing, for example, in basements or basements. ARMOKROV soft roofing is a modern roofing and waterproofing material that has replaced traditional cardboard-based roofing - roofing felt or rubemast. The base is a non-decaying substrate made of fiberglass, fiberglass or polyester fabric, coated on both sides with a bitumen-polymer layer. It is additionally protected from the effects of sunlight by a coarse-grained dressing. The covering from the polymeric film preventing sticking together in a roll. Laying by fusing - using a gas burner, as well as gluing on cold or hot bituminous mastic. Rotting base, high content of coating bitumen. The cover layer of bitumen with the addition of polymer components provides high heat resistance of the material, elasticity at ambient temperatures down to -30°C. After the material received well-deserved recognition from consumers as a reliable roofing and waterproofing material that meets all modern requirements, a modern workshop with new automatic equipment was built in 2006. And now we guarantee a long service life of roofing, excellent product quality at the lowest price. TECHNOELAST Features: Technoelast is biostable. Scope: It is intended for the device of a waterproofing of buildings, constructions and building constructions. Structure: Technoelast is obtained by double-sided application of a bitumen-polymer binder consisting of bitumen, SBS (styrene-butadiene-styrene) polymer modifier and mineral filler (talc, dolomite, etc.) on a glass or polyester base. Coarse-grained and fine-grained dressings, polymer films are used as a protective layer. Specifications: Rolls of material should be stored in a dry closed room in a vertical position in one row in height at a distance of at least 1 m from the heaters. Grades: Depending on the type of dressing and field of application, Technoelast is produced in two grades: Technoelast K - with coarse-grained dressing on the front side and a polymer film or fine-grained dressing on the deposited side of the fabric, used for