Rental parquet grinder grinder

Rental. Scraping (parquet grinding) machine 220V. The SO-206A scraper is designed for processing parquet and plank floors, both newly laid and repaired, for removing old paint and varnish coatings and cleaning dirt during floor repair. The parquet sanders have a compact and robust steel body with a hinged lid over the sanding drum and a retractable carrying handle. The sanding drum has a simple and reliable device for fastening the sanding paper, which has proven itself over many years of operation. To fix the skin in the drum, a groove is made and two clamping rollers with flats are installed. Combining (with the help of the keys attached to the machine) the flats of the clamping rollers with the groove fill the ends of the skin and, while turning the clamping rollers towards each other, stretch and fix the sanding skin. The outer surface of the drum has an elastic coating that provides a tight and uniform tension of the sanding paper, which in turn ensures a high quality of the machined surface. For grinding, a rolled sandpaper 200 mm wide on a twill (cloth) basis should be used. The grinding drum is driven by an electric motor through a V-belt transmission. The tension of the V-belt is produced by the displacement of the rotary engine plate. The side wheels of the undercarriage are polyurethane coated to prevent damage to the floor when moving the machine. The eccentric axles of the side wheels provide convenient and quick adjustment of the position of the grinding drum relative to the surface to be treated. The machine is provided with a mechanism for adjusting the pressing force on the floor surface, as well as a device for adjusting the distance of the machine from the wall of the room. The design of the machines allows, with the skirting boards removed, to process the floor surface near the walls. The undercarriage and the rear piano wheel provide easy control and good maneuverability of the machine. The control mechanism, placed on the stand, ensures the transfer of the machine from the transport position, when the grinding drum is raised above the floor surface, to the working position, when the drum is in contact with the floor. Under the right control handle, there is also a mechanism for quickly lifting the drum, which makes it easier to control the machine during operation. The operator, by lightly pressing the fingers of his right hand, has the ability to instantly separate the drum from the surface to be ground, which eliminates the formation of "holes", improves working conditions and the quality of grinding. The machines are also equipped with an effective system for suction and removal of dust from the grinding zone, consisting of an air duct built into the body, a powerful fan, a rack pipe, a dust separator bag. The electric panel is located on the control rack in a position convenient for the operator. The electrical equipment of the machines provides the following types of protection: protection against electric shock in the event of phase leakage to the ground, against short circuits, zero over