Flushing nozzles with ultrasound

Professional diagnostics and flushing of all types of injectors with removal at the stand. - Dismantling of injectors, - Diagnostics of injectors on the stand for: leakage, performance, productivity, spray pattern, injection uniformity, - Flushing of injectors in an ultrasonic bath. The cavitation zone occurs directly in the nozzle channel, i.e. the injector nozzle, fuel channel and injector valve needle are cleaned. -Diagnostics on the stand after flushing (to evaluate the results of flushing), -Disassembly of the throttle assembly and its flushing. Flushing of channels of idling. - Installing the throttle assembly and injectors in place. Before flushing, we recommend changing the fuel filter and the mesh in the tank!. If additional disassembly is required to dismantle the injectors or throttle assembly, it is paid separately, depending on the complexity. This method allows you to effectively, efficiently and safely wash the nozzles. To do this, they are removed from the engine and installed in a special washing stand. Using the built-in software, you can vary various parameters and flushing modes, which ultimately allows you to flush the nozzles with high quality to the state of new ones. In the test mode, after flushing, the tightness, balance, spray pattern and performance are checked. Rinsing in an ultrasonic bath allows you to clean the nozzles from the most severe contamination. Tel: 8747 244 49 65 also whatsapp on this number