Trailer grader. Full electro-hydraulic control
61 459.33 rub
Listing removed from published March 13
Trailer grader. Full electro-hydraulic control
№42138 Created: February 2 2022
Address:
Irkutsk, Russia
What is the fundamental novelty of a semi-trailer grader!?
- Transition from hydraulic control (like analogues) to electro-hydraulic, which allows you to create a full-fledged control of grader equipment from the tractor cab!
- The increased productivity of the grader was achieved in comparison with the mechanical adjustment of the blade of the analogue, due to the full-fledged electro-hydraulic control of the drive of the grader's working bodies, placed in the operator's cab.
- Adjustment of the spatial position of the blade is now performed by the operator from the workplace in the tractor cab, both in a static state and during its working movement. Now the operator does not have to get out of the cab and adjust the position of the blade every time, which causes a lot of operational inconvenience, as well as a decrease in the productivity of the equipment, requiring constant adjustments of the blade and, accordingly, the quality or re-performed by it roadwork.
-- The hydraulic drive of the working body is powered by the hydraulic system of the tractor. Lifting / lowering / swiveling the blade / lateral removal of the traction frame and blade is carried out by hydraulic cylinders.
- The working body of the blade is now performed in a reinforced version, because its working mass has been increased.
- An excellent budget replacement for a full-fledged and expensive motor grader, which significantly expands the capabilities of the base tractor with a pulling force of up to 10 tons.
- It is possible to install a quick-change DLA manipulator with a load capacity of 3t on the XTA tractor offered by us to work with a universal onboard or original tipper semi-trailer (with a capacity of 10t, bogie made in Italy, with the possibility of installation on an onboard p/p of the same manipulator, with 7 types of attachments), which allows you to create a utility or road complex of universal use, with the possibility of their self-loading and self-unloading.
You need to carry out road grader work, but you do not have a motor grader and it is very expensive to purchase or is not needed due to the lack of a constant amount of work for it, but there is a way to use the XTA tractor in tandem work with grader equipment. Economical, convenient, it is always at hand and used as needed, increasing the efficiency of your tractor!
Our advantages:
- New control system for grader equipment!
- Increased productivity due to the new control system.
- Full operation of grader equipment.
- The versatility of using your tractor, reducing the number of specialized equipment used and the staff of specialists to work with it, any of your equipment is always at your fingertips.
- Reducing the cost of purchasing specialized equipment.
- Increasing the productivity of the use of the base tractor due to the large number of use of a variety of quick-change attachments.
- Reducing the cost of acquiring an expensive motor grader or renting it permanently.
- Transition from hydraulic control (like analogues) to electro-hydraulic, which allows you to create a full-fledged control of grader equipment from the tractor cab!
- The increased productivity of the grader was achieved in comparison with the mechanical adjustment of the blade of the analogue, due to the full-fledged electro-hydraulic control of the drive of the grader's working bodies, placed in the operator's cab.
- Adjustment of the spatial position of the blade is now performed by the operator from the workplace in the tractor cab, both in a static state and during its working movement. Now the operator does not have to get out of the cab and adjust the position of the blade every time, which causes a lot of operational inconvenience, as well as a decrease in the productivity of the equipment, requiring constant adjustments of the blade and, accordingly, the quality or re-performed by it roadwork.
-- The hydraulic drive of the working body is powered by the hydraulic system of the tractor. Lifting / lowering / swiveling the blade / lateral removal of the traction frame and blade is carried out by hydraulic cylinders.
- The working body of the blade is now performed in a reinforced version, because its working mass has been increased.
- An excellent budget replacement for a full-fledged and expensive motor grader, which significantly expands the capabilities of the base tractor with a pulling force of up to 10 tons.
- It is possible to install a quick-change DLA manipulator with a load capacity of 3t on the XTA tractor offered by us to work with a universal onboard or original tipper semi-trailer (with a capacity of 10t, bogie made in Italy, with the possibility of installation on an onboard p/p of the same manipulator, with 7 types of attachments), which allows you to create a utility or road complex of universal use, with the possibility of their self-loading and self-unloading.
You need to carry out road grader work, but you do not have a motor grader and it is very expensive to purchase or is not needed due to the lack of a constant amount of work for it, but there is a way to use the XTA tractor in tandem work with grader equipment. Economical, convenient, it is always at hand and used as needed, increasing the efficiency of your tractor!
Our advantages:
- New control system for grader equipment!
- Increased productivity due to the new control system.
- Full operation of grader equipment.
- The versatility of using your tractor, reducing the number of specialized equipment used and the staff of specialists to work with it, any of your equipment is always at your fingertips.
- Reducing the cost of purchasing specialized equipment.
- Increasing the productivity of the use of the base tractor due to the large number of use of a variety of quick-change attachments.
- Reducing the cost of acquiring an expensive motor grader or renting it permanently.
№42138 Created: February 2 2022
