Rust Remover

ADDITIONAL INFORMATION Appointment for treatment of metal (steel) surfaces in order to modify corrosion centers and protect treated surfaces from subsequent atmospheric and climatic influences. The following steel products (structures) are subject to processing: garages, roofs, cars, trusses (supports) of bridges and overpasses, products with welded seams, rivet joints. Processing is carried out before painting or applying other protective coatings. Advantages It is fire and explosion safe, forms a protective film of iron phosphates on the surface, which helps to increase the service life of the subsequent paint and varnish coating, as well as to improve its anti-corrosion and adhesive properties. Application Stir thoroughly before use. A loose layer of rust, grease, dirt, dust is removed from the treated surface. The rust converter is applied by wiping, brushing or dipping. Based on the thickness of the lesion, the surface is treated with a transducer 1-4 times. After finishing work with the transducer and before applying the finish coat, dry the surface. After drying (last treatment), it is enough to wipe the surface with a dry rag or brush (to remove residual plaque). Surface treatment temperature from +5°С to +35°С. Drying at t=+20°C and 65% humidity 1-3 hours Consumption from 0.1 m?/kg-0.3 m?/kg, depending on the method of application Storage Rust converter is stored in tightly closed containers in warehouses at temperature not lower than 5?С Warranty period 12 months from the date of production Precautions in case of contact with eyes, rinse with plenty of water. Work in a well ventilated area. Keep away from children.87016737120