Multi-contact Welded Mesh Machine

1. The machine works on the technology of electrical synchronous control. The welding process and welding time are controlled by a digital integrated circuit. The welding process proceeds stably and with high precision.
2. Welded joints have a small contact patch, no defects, and high strength.
3. The machine pulls the longitudinal wire segments from the coil of wire. This equipment is equipped with a special device for cutting wire, as well as a system for determining the position of the cells, so the distance between the mesh elements is the same and constant, which is necessary for cutting the resulting product.
4. The machine has a mesh pulling system that cuts wire mesh elements under mechanical load and mesh positioning device.
5. This allows you to control the holes of the wire loops and the open part of the mesh more carefully, and more accurately carry out the welding operation.
6. You can get welding meshes by roll or card.
technical specifications
model lm-2000
mesh width 2000mm
poppy. number of electrons 40
wire diameter 3.0-5.0mm
cell 50*50-200*200mm
cross wire feed mode from the bunker
coil feed mode
manually adjusting the size between longitudinal wires
size adjustment between cross wires automatically
poppy. welding speed 45 rows/min
mesh type in rolls or in cards
material low-carbon, galvanized wire
power supply 380v 50hz