Wire Mesh Making Machine

1. This machine uses the technology of electric synchronous control. The welding process and welding time are controlled by a digital integrated circuit. The welding process proceeds stably and with high precision. Welded joints have a small contact patch, have no defects and have high strength.
2. The machine pulls the longitudinal and transverse wire segments from the coil of wire.
3. This equipment is equipped with a special device for cutting wire (the device is protected by a state patent), as well as a system for determining the position of cells (patent), so the distance between the mesh elements is the same and constant, which is necessary for cutting the resulting product.
4. The machine has a mesh pulling system that cuts wire mesh elements under mechanical load (the system is protected by state patent Zl200520024380.9) and a mesh positioning device. This allows you to control the holes of the wire loops and the exposed part of the mesh more carefully, and more accurately carry out the welding operation.
item model lm-189
wire diameter 1.8-3.5mm
longitudinal wire feed continuous wires
cross wire feed discontinuous wires
cell 50*50-200*200mm
power supply 380v 50hz
power 189 kva
number of electrodes 24
mesh width 1200mm
poppy. speed 45 deliveries/min
weight 3.2t
dimensions 1.8*2.5*1.8m