Segment parabolic antenna

Description ASP 24 segment parabolic antenna: used to receive and transmit radio signals with a range of 2.4 - 2.5 GHz and create a wireless network. Used with any equipment that supports 802.11g and 802.11b. The design of the ASP 24 antenna includes a segmented parabolic reflector and a log-periodic feed. The reflector has a lattice structure. Such a device makes it possible to increase the resistance to the wind load of the antenna (reduce the effect of windage), as well as its total weight. In addition, the design makes it possible to achieve a maximum gain of 24 dBi with relatively small reflector dimensions. The special coating ASP 24 provides effective protection of the antenna from wear and tear from the environment and increases its service life by several times. Specifications ASP 24 operating range is 2400-2500 MHz, type of coating - enamel, weight - 2.5 kg, type of radiation - directional, , type of use - external, body material - steel, type of polarization - vertical/horizontal, ASP antenna position 24 at the place of its installation should be suitable for the polarization of the waves received by it. To ensure long and trouble-free operation of the antenna, it is recommended that it be inspected at least once a year and serviced if there are any malfunctions in its operation. It is strictly forbidden to repair the antenna if it is under high-frequency voltage. The antenna should be checked for damage, corrosion, and contamination, which should be removed using a cotton cloth and plumbing tools. Mounting the ASP 24 antenna It is necessary to choose an installation site that is free from shielding superstructures and other antennas within a radius of up to 1.5 m. . Technical characteristics: Frequency, in MHz: 5725 - 5850 gain, in dBi: 35 Beam width in vert.\horiz. plane - 3 dB, in deg. 0.5 0.5 Side radiation, level, in dB: -15 Wave resistance, in Ohm: 50 Cross-polarization suppression, in dB: 26 Polarization type: Linear Material: Steel Wind speed, max., m/s: 40