Series for pipe production: carbon steel, hot or cold rolled steel, galvanized steel.
Specifications:
Pipe making diameter:Φ8—Φ38mm
Pipe thickness: 0.3~1.5mm(round)
Pipe thickness: 0.3~1.0mm(rectangular)
Manufacturing speed: 90—120m/min
Line composition:
Double head decoiler:
Series for pipe production: carbon steel, hot or cold rolled steel, galvanized steel.
Specifications:
Pipe making diameter:Φ8—Φ38mm
Pipe thickness: 0.3~1.5mm(round)
Pipe thickness: 0.3~1.0mm(rectangular)
Manufacturing speed: 90—120m/min
Line composition:
Double head decoiler:
Structure form:Two work stations,mechanical tension
Tape width: up to 100mm
tape outer diameter:max Φ1600mm
Tape Inner Diameter:Φ350-Φ550mm(can be customized)
Support Height:1000mm
Loading weight:Maximum 2.0 tons.
Strip cutting and butt welding machine:
The machine automatically walks on welding, automatically returns after welding and waits for the next command.
Structure shape: mechanical cutting, manual butt welding.
Strip thickness:max 2.5mm
Strip width: up to 160mm
Horizontal storage:
This accumulator is specially designed for accumulating tape for continuous production without stopping the line.
Form of structure: horizontal accumulator, feed motor drive.
Tape thickness: up to 1.50mm
Tape width: up to 160mm
Storage capacity: up to 500m
Motor power: 18.5KW.
Speed: up to 100 meters per minute
Main molding machine:
Used to continuously wind steel tape into the tube and weld the tube into the tube, and then use the skin effect of high frequency current and proximity effect to make the electric current highly concentrated on the welding surface of the tube end, so that the tube end quickly heats up to the soldering temperature, and squeeze the push roller to complete the welding, and then cooling, sizing and rough straightening, and become the required characteristics of the steel. Composition of the machine using the bottom line of the law, the diameter of the roll with a double pass. Host using forming section, welding section, calibration segment. Power: 37KW.
Computer flying saw (cold):
Structure shape: Using computer program control, tracking the cutting method.
Cutting accuracy: plus and minus 2mm
Travel speed: 100m per minute
Cut off motor power: 4KW AC motor
Drive motor power: Servo motor 11KW
Feed motor power: Servo motor 2KW
Saw blade diameter: HSS Φ350mm
Automatic receiving table:
It is used to transport finished pipe after cutting by computer flying saw. The steel pipe is transported to the discharge position by a round roller and packed and packaged. 9 meters long.
High frequency electrical appliances:
The welding machine is a microcomputer high-energy high-frequency induction heating device with high efficiency, simple and reliable circuit, easy commissioning and other advantages, not only for manufacturing enterprises, but also for improving production technology and improving product quality. A complete set of equipment from rectifier cabinet, speed control cabinet, inverter cabinet, transformers, panel, feng shui, etc. Solid state high frequency welding machine according to the design of continuous working system, PLC programmable control system realizes welding machine synthesis circuit control and function breakdown diagnostics, monitors the status of the equipment through the liquid crystal display. Power 150kW.
Production time: 60 days
Warranty period: 2 years
№234707 Created: February 8 2023
jb777
Was online yesterday 17:18