bituminous primer, bituminous mastic

- AquaMast waterproofing bituminous mastic for foundations is a completely ready-to-use material based on petroleum bitumen, containing technological additives, mineral fillers and a solvent. Scope: It is intended for coating waterproofing of structures (concrete, reinforced concrete, metal, wood, etc.) buried in the ground and in contact with a humid environment: foundations, piles, etc. Mastic consumption per 1 layer is 1 kg/m2. When applied to a vertical surface - 0.7 kg/m2. Production of works: Works to be carried out at a temperature from -10°С to +40°С. At temperatures below +5°C, the mastic must first be kept at room temperature for at least a day. Do not use near open flame sources. Carry out work in well-ventilated areas. Avoid contact with skin and eyes. Do not use indoors. In case of contact with the skin, the mastic must be washed off with a solvent. The drying time of the mastic to lint is no more than 24 hours, the final set of waterproofing properties depends on the temperature and humidity of the environment. - Primer bituminous AquaMast is a solution of petroleum bitumen in specially selected organic solvents. It has a high penetrating power and a short drying time. Scope: The AquaMast primer is intended for reliable adhesion of waterproofing materials to the base. It is used both with rolled bituminous materials and with coated waterproofing. Primer consumption - 0.35 l / m2. Production of works: Works to be carried out at a temperature from -10°С to +40°С. At temperatures below +5°C, the primer must first be kept at room temperature for at least 24 hours. Do not use near open flame sources. Carry out work in well-ventilated areas. Avoid contact with skin and eyes. Do not use indoors. In case of contact with the skin, the primer must be washed off with a solvent.